So A few weeks ago I posted about picking up my first Muzzleloader used at a pawn shop. I cleaned it up and have been shooting it. The riffle groups shots very well. My concern or questions is around the amount of hold over I having to use. At 50 Yards I am holding about 8” high to hit a target bullseye. It’s shooting good groups but is this hold over normal? My most recent load is 70 grains Pyrodex RS, .018th patch and .440 ball. Any insight would be appreciated and thanks in advance for all the great information.
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
New Muzzleloader Shooter Hold Over Question
- Thread starter SB1911
- Start date
Help Support Muzzleloading Forum:
- Joined
- May 28, 2022
- Messages
- 9,109
- Reaction score
- 22,001
- Location
- Louisiana & My camp in Mississippi
Do you have fixed sights?
I would want dead on at 50 yards personally. Need a higher front sight?
Thank you. I will start looking around. Parts are a little hard to find where I live it seems.
You can make one with some steel, a hacksaw, and files. Easy quick project.
What part of the state are you in?
- Joined
- May 28, 2022
- Messages
- 9,109
- Reaction score
- 22,001
- Location
- Louisiana & My camp in Mississippi
If you’re holding 8” high at 50 yards to correct your low POI and you don’t have adjustable rear sights you’ll have to file down your front sight to raise your POI. Just file a bit at a time and make some shots.
Phil Coffins
69 Cal.
For raising the group lower the front sight. There’s been a formula to calculate how much to move the sight. Use it and save a lot of powder and lead!
deepen the notch in the rear sight.
- Joined
- May 28, 2022
- Messages
- 9,109
- Reaction score
- 22,001
- Location
- Louisiana & My camp in Mississippi
That too, if your shooting high.
Last edited:
Billings Montana
Too bad, we do have a grumpy old guy in Kalispell who usually has parts.
So file down the existing front sight to bring the group up, correct?
- Joined
- May 28, 2022
- Messages
- 9,109
- Reaction score
- 22,001
- Location
- Louisiana & My camp in Mississippi
Yes
Phil Coffins
69 Cal.
Yes, the front sight always moves the opposite way you want the group to go, the rear sight moves towards the way you want the group to go.
Yes.
Correct, if the gun is shooting low, filing down the front sight will raise the point of impact.
Just file off a little at a time.
File, shoot, repeat until you get on target where you want to be.
Just file off a little at a time.
File, shoot, repeat until you get on target where you want to be.
If a dead on hold prints low, yes.
