Will Acetone safely work to degrease/remove skin oils from ML builds? I have a barrel with Jax black that I want to adjust the color. I have handled it and need to clean it first. What should I use?
Respectfully
TerryC
Respectfully
TerryC
I wish I had that option.I use an ultrasonic with gun degreaser
You have that option, $50 at harbor freight, its worth it when you have a muzzle. Loader to clean often.I wish I had that option.
Thank you
TerryC
Yes, but "safely" is the key word,, just be sure to wear/use proper protection for your hands, and have good ventilation.Will Acetone safely work to degrease/remove skin oils from ML builds?
I wore gloves and had proper ventilation. Thank you for your interest in my post.Yes, but "safely" is the key word,, just be sure to wear/use proper protection for your hands, and have good ventilation.
Denatured Alcohol works well also,, same gig,, safely handing these products is important.
I thought about that. I have it in my outbuilding. I wasn't sure if it would leave a residue behind? I use it to clean most things on my vehicles and tractor, but that ain't my Kibler. Now I know for future use. Thank you.I’ve used brake cleaner and carburetor cleaner with good results.
Great description thank you.Denatured alcohol.
Have a few on hand..
Wet one with the alcohol wipe the area, then wipe it dry. Do not let the alcohol evaporate, if you do, all the contaminates will remain.
Do this a couple of times, after both are remaining clean. ( if the rags are showing any form of contaminates)
Then, you will have a surface that is clean.
I was a certified fuel tank sealer for the largest aircraft manufacturer that isn’t Airbus. Surface adhesion requires a perfectly clean surface the same as any form of bluing requires.
Acetone is my go to degreaser! It is probably one of the safest products of this type you can get? One does need to protect eyes and lungs. If you are going to use it only 30 minutes or so you need no protective gloves. With prolonged use of acetone make sure you use gloves. When grease sees acetone coming it jumps out of the way! LOL!Will Acetone safely work to degrease/remove skin oils from ML builds? I have a barrel with Jax black that I want to adjust the color. I have handled it and need to clean it first. What should I use?
Respectfully
TerryC
Thank you, I used it last night, and everything seemed to work fine. I will continue after church today.Acetone is my go to degreaser! It is probably one of the safest products of this type you can get? One does need to protect eyes and lungs. If you are going to use it only 30 minutes or so you need no protective gloves. With prolonged use of acetone make sure you use gloves. When grease sees acetone coming it jumps out of the way! LOL!
Enter your email address to join: