• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD WTS TC RENEGADE WITH 36 CAL. NEW GREEN MTN BARREL

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Apr 17, 2017
Messages
204
Reaction score
107
Location
Seattle
For sale is a TC Renegade stock with a Green MTN 36 cal. barrel. Barrel is new and unfired, I believe. Would make a great squirrel rifle or a starter rifle for that youngster. Includes a box of Hornady balls.

$510 shipped


36cal22.jpg

36cal.jpg

36cal44.jpg

36cal11.jpg
 

Attachments

  • IMG_3958.jpg
    IMG_3958.jpg
    444.3 KB · Views: 0
Last edited:
Also the barrel length and width across the flats. I think it would be 1” being on a Renegade! Reds
 
Could you possibly run a jagged patch down the barrel and note how much the rod spins to get an idea of twist rate?
 
Could you possibly run a jagged patch down the barrel and note how much the rod spins to get an idea of twist rate?
Less than 30 sec. of searching.

Green Mountain Muzzle Loading Rifle Barrels are machined from high quality American made bar stock, A.I.S.I. 1137 modified, stress relieved, annealed, certified rifle barrel quality steel. All barrels are drilled from solid stock, reamed to a high degree of smoothness, then optically checked for straightness. Very close tolerances are maintained. Diameters vary less than .0002" within any bore.

Cut Rifling Specifications:
  • Each barrel has eight lands and grooves.
  • Grooves cut .010 to .012" deep, depending on caliber.
  • Twist is 1 turn in 48 inches for .32 caliber.
  • Twist is 1 turn in 48 inches for .36 caliber.
  • Twist is 1 turn in 56 inches for .40 caliber.
  • Twist is 1 turn in 60 inches for .45 caliber.
  • Twist is 1 turn in 70 inches for .50 caliber.
  • Twist is 1 turn in 70 inches for .54 caliber.
  • Twist is 1 turn in 70 inches for .58 caliber.
 
Status
Not open for further replies.
Back
Top