Need parts for Pedersoli Charleville Mle. 1763/66! Help!

[DaveC]

The mainspring on a Pedersoli-mfr. Charleville Model 1763/66 flint lock is broken/ snapped. The lock has had a bad battery/steel/"frizzen" replaced. The cock was replaced with a swan-neck by a previous owner, and it doesn't fit right, and in short, needs a factory replacement.

No one seems to have parts?

I'm not sure if anyone can repair the lock?

I'm not sure if Mr. Richard Beauchamp at Flintlock Etc. in Richmond, MA has parts? An all-new Pedersoli flint-lock mechanism/complete new lock for the 1763/66 from VTI in Cape Coral, FL is $400 bucks. I've contacted Ackermann Arms by email, but I have never received a reply. Kindly help me get my .69 caliber flintlock musket working again, please!

 

[Clark Badgett]

The mainspring on a Pedersoli-mfr. Charleville Model 1763/66 flint lock is broken/ snapped. The lock has had a bad battery/steel/"frizzen" replaced. The cock was replaced with a swan-neck by a previous owner, and it doesn't fit right, and in short, needs a factory replacement.

No one seems to have parts?

I'm not sure if anyone can repair the lock?

I'm not sure if Mr. Richard Beauchamp at Flintlock Etc. in Richmond, MA has parts? An all-new Pedersoli flint-lock mechanism/complete new lock for the 1763/66 from VTI in Cape Coral, FL is $400 bucks. I've contacted Ackermann Arms by email, but I have never received a reply. Kindly help me get my .69 caliber flintlock musket working again, please!

Just about anything can be Repaired. It’s just being willing to pay the people with skills, for those skills.

 

[DaveC]

Just about anything can be Repaired. It’s just being willing to pay the people with skills, for those skills.

Take my money! Please!
VTI has the factory cock, but not the mainspring...

 

[Clark Badgett]

Take my money! Please!
VTI has the factory cock, but not the mainspring...

I wish I had those skills.

 

[New Hampshire]

Did you contact Pedersoli?

 

[1General_Grant]

The mainspring on a Pedersoli-mfr. Charleville Model 1763/66 flint lock is broken/ snapped. The lock has had a bad battery/steel/"frizzen" replaced. The cock was replaced with a swan-neck by a previous owner, and it doesn't fit right, and in short, needs a factory replacement.

No one seems to have parts?

I'm not sure if anyone can repair the lock?

I'm not sure if Mr. Richard Beauchamp at Flintlock Etc. in Richmond, MA has parts? An all-new Pedersoli flint-lock mechanism/complete new lock for the 1763/66 from VTI in Cape Coral, FL is $400 bucks. I've contacted Ackermann Arms by email, but I have never received a reply. Kindly help me get my .69 caliber flintlock musket working again, please!

You can buy parts off of the Davide Pedersoli website, I'm not if they ship to the US though.

 

[Britsmoothy]

https://www.henrykrank.com/pedersoli-italian-charlville-lock-flintlock-1432/

 

[FlinterNick]

The mainspring on a Pedersoli-mfr. Charleville Model 1763/66 flint lock is broken/ snapped. The lock has had a bad battery/steel/"frizzen" replaced. The cock was replaced with a swan-neck by a previous owner, and it doesn't fit right, and in short, needs a factory replacement.

No one seems to have parts?

I'm not sure if anyone can repair the lock?

I'm not sure if Mr. Richard Beauchamp at Flintlock Etc. in Richmond, MA has parts? An all-new Pedersoli flint-lock mechanism/complete new lock for the 1763/66 from VTI in Cape Coral, FL is $400 bucks. I've contacted Ackermann Arms by email, but I have never received a reply. Kindly help me get my .69 caliber flintlock musket working again, please!

The mainspring can be replaced rather easily, the cock not so sure and frizzens are often not a snap on fit.

You’ll need someone to fit everything, even some of these pedersoli CNC guns are off by a few thousandths.

 

[Britsmoothy]

The OP has gone to ground....

 

[FlinterNick]

You can buy parts off of the Davide Pedersoli website, I'm not if they ship to the US though.

You sure can

 

[sussexmuzllodr]

You sure can

Nick I think that the minimum is a $50 Dollar Purchase...yes?

 

[FlinterNick]

Nick I think that the minimum is a $50 Dollar Purchase...yes?

I would put 50 as an arbitrary figure on ordering from them yes, because they use UPS.

However their shipping is 45$ on all items, including oversized items like stocks and barrels.

But I’ve ordered things like barrel bands, band springs from them in single orders for around 150 bucks, the parts come finished too.

Its only really good if you buy 150 in parts or more.

The flintcock replacement part the OP needs is probably the most expensive, because the cost will be the cock, jaw and screw … probably 125-150 just for that single part. A complete new lock will cost around 285-325.

 

[8Ball]

Contact Pedersoli

 

[rickystl]

Sounds like a new, complete lock from Pedersoli is the way to go,

 

[FlinterNick]

Sounds like a new, complete lock from Pedersoli is the way to go,

Yeap, i woudl get teh replacment lock and then sell of the parts you don’t need, the parts will sell quickly. Or drop in the new lock (if it fits) and sell off the old one.

 

[sussexmuzllodr]

I would put 50 as an arbitrary figure on ordering from them yes, because they use UPS.

However their shipping is 45$ on all items, including oversized items like stocks and barrels.

But I’ve ordered things like barrel bands, band springs from them in single orders for around 150 bucks, the parts come finished too.

Its only really good if you buy 150 in parts or more.

The flintcock replacement part the OP needs is probably the most expensive, because the cost will be the cock, jaw and screw … probably 125-150 just for that single part. A complete new lock will cost around 285-325.

Thanks for the info Nick.