Help Support Muzzleloading Forum:
-
-
Notchy Bob reacted to TDM's post in the thread Standard thread size for ramrods and attachments....... with
Like.
As said, stick with 10-32 threads for .50/.54/.58 etc. the smaller 8-32 threads are better suited for smaller jags for smaller calibers... -
Notchy Bob reacted to ravenousfishing's post in the thread Standard thread size for ramrods and attachments....... with Like.
5/16 and 3/8 are the diameter of the rod itself. Most of my attachments are 10-32, however I do have adapters that go from 10-32 to 8-32...
-
Notchy Bob reacted to 64Springer's post in the thread Standard thread size for ramrods and attachments....... with Like.
10/32 is .185 or so. 8/32 is .165 or so. Measure the OD of the threads.
-
Notchy Bob reacted to FishDFly's post in the thread Standard thread size for ramrods and attachments....... with Like.
Oh, there are 2 sizes, only you can tell which one "you" have.
-
Notchy Bob reacted to ZUG's post in the thread Standard thread size for ramrods and attachments....... with Like.
R Ellis is correct but for "most" of muzzle loaders 10-32 is common the 8-32 is used for modern cleaning rods.
-
Notchy Bob reacted to R Ellis's post in the thread Standard thread size for ramrods and attachments....... with Like.
8/32 0r 10/32
-
Traditional are very durable. Linseed oil is a pia to apply. And slow. But it’s in the wood, not just on top. Not saying it’s the best...
-
I recently used Jim Chambers gun stock oil, and was quite pleased. Easy to work with, and with multiple coats I was able to achieve the...
-
Those are pretty and pretty much how I feel about open grain as well. Plus you can fill with a darker died sealer and give the grain a...
-
I too LOVE the modern 'wiping varnishes' and use those made by Arm-R-Seal, that many fine custom furniture makers use. You can 'repair'...
-
I am a fan of walnut sealer first, I use the Birchwood Casey stuff, I think walnut looks better without the open pores. The grain sealer...
-
BWC Tru-Oil is a good product that can give a durable finish to any degree of shine. IMG_0841 by Oliver Sudden, on Flickr
-
I’m hoping to take and post pics tomorrow of my walnut Kibler SMR I just finished a few days back. I did an extremely basic finish of 2...
-
Notchy Bob reacted to chorizo's post in the thread How safe is it to use lead round balls while hunting? with Like.
Unlike modern unspeakable ammo, Lead from a ML usually doesn't scatter as it isn't designed to be frangible. That said if you hit bone...
-
Notchy Bob reacted to azmntman's post in the thread How safe is it to use lead round balls while hunting? with Like.
Lead kills. Thats why even after Dan'l n Davvy we still shoot it. Dont keep your ammo in your mouth and no problems. Have not ever...
-
-
Loading…
-
Loading…