- Joined
- Feb 24, 2021
- Messages
- 99
- Reaction score
- 83
I use and recommend a sear lift for the full cock notch which limits the depth of the sear engagement. It looks to me like the sear full cock engagement angle needs some stoning as well. You want a square, even angle on both surfaces that contacts all the way across the sear face width. The idea is to get the sear to disengage from the full cock notch without camming/moving it backwards or letting it creep forward until disengagement breaks the shot. The correct, squared angle, between sear face and full cock will not be able to be knocked off full cock by impact or direct pressure but should break cleanly with no trigger creep. Once this angle in right then the sear lift can be employed to limit sear engagement depth.This fl had a really hard trigger so I took it apart and polished it a little and lubed it up ,now it’s better but when I squeeze to fire it only falls to half cock, I’m thinking maybe the trigger spring is to stout, if I jerk the trigger it will fire
What you fellows think?View attachment 80895View attachment 80896View attachment 80897
That's all it would have took. And maybe some tension off the sear screw too.,,,,,,,,,,,, and took some tension off sear spring and now have a surprisingly good trigger.
Enter your email address to join: