He should be shipping mine Monday. Send me a PM and I'll let you know.Do you know, off hand, how that peep fits/works on a Zouave?
You can become a Supporting Member which comes with a decal or just click here to donate.
He should be shipping mine Monday. Send me a PM and I'll let you know.Do you know, off hand, how that peep fits/works on a Zouave?
Thank you!He should be shipping mine Monday. Send me a PM and I'll let you know.
Got a Zoli Zouave variant built for Navy Arms known as the "Buffalo Hunter" and was hoping for such a solution.I pulled out my Zoli Zouave for inspection. The sight would have to be mounted further back and on the stock rather than the tang to avoid interference with the hammer. <<img removed as unnecessary duplication>>
Bummer. At least I have 2 more guns to try it out on.I pulled out my Zoli Zouave for inspection. The sight would have to be mounted further back and on the stock rather than on the tang to avoid interference with the hammer.
View attachment 158522
I live in Australia and when our dollar isn't scaling a mountain against the greenback I'll be keen. Happy to pay postage, when I bought my Lee Shaver sight it was only $6-7 freight. So it's not going to be break the bank for me.I will ship to Canada, however by USPS International First Class Mail and the buyer pays the postage.
The sight should sharpen target definition very well at 75 yards. i use mine at 100. International First Class mail to "Down Under" should be about $15.00 USD.I live in Australia and when our dollar isn't scaling a mountain against the greenback I'll be keen. Happy to pay postage, when I bought my Lee Shaver sight it was only $6-7 freight. So it's not going to be break the bank for me.
I'll check the dimensions but one of these on my fusil might help me get to that 75 yard hunting range I want.
I also would like to know about the Colonial fit.Has anyone tried this peep on a kibler colonial? Anyone have pictures?
are you still making these flip up peep sightsThis sight is being fabricated on an ongoing basis. All orders have been filled at this time and I have three more sights on the bench. Please advise here if you have any questions, but please PM to place an order rather than add a comment on this post.
This folding tang peep sight should be suitable for use on rifles having a tang length between 2" - 3" . It will not work on long, Hawken type tangs. A long tang version is under development.
The base is slotted to allow for differences in tang screw location and is slightly curved so as to lay flat on your curved tang.
Windage is adjustable by turning the pivot screw.
Elevation is adjustable by moving the aperture up or down on the staff.
The aperture disc has been blackened to reduce sun glare.
You should be able to mount the sight using your existing tang screw, however if your trigger plate is threaded 8-32, I find that a flat headed lock bolt works much better. I can provide a polished and browned lock bolt if desired at additional cost. It will be necessary for you to cut it to the proper length.
I have mounted this sight successfully on three different rifle designs as shown in the photo below.
The base is slotted to allow for differences in tang screw location and is slightly curved so as to lay flat on your curved tang.
Windage is adjustable by turning the pivot screw.
Elevation is adjustable by moving the aperture up or down on the staff.
The aperture disc has been blackened to reduce sun glare. Aperture diameter can be made to your specification.
You should be able to mount the sight using your existing tang screw, however if your trigger plate is threaded 8-32, I find that a flat headed lock bolt works much better. I can provide a polished and browned lock bolt if desired at additional cost. It will be necessary for you to cut it to the proper length.
I have mounted this sight successfully on three different rifle designs as shown in the photo below.
View attachment 131533 View attachment 131534 View attachment 131535
The sight is $75 plus $5 for shipping. Add $3.00 if you want the lock bolt. Payment by money order is preferred but I can take Paypal if absolutely necessary. If it does not work on your rifle just send it back for refund.
Peep sights effectively sharpen the target image at longer ranges. Please advise any questions.
Yes, I'm making two right now for another forum member. Please send a PM if interested in placing an order.are you still making these flip up peep sights
Sorry, I don't monitor this thread for questions. Please PM for fitting questions. Thanks.My hawken (investarm) has a forward and rear tang screw...wondering if this would work mounted to the front screw?
PM answered.I will take one with the standard-size peephole and a tang screw. PM sent.
Enter your email address to join: