• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

FOR SALE Folding Peep Sight

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I pulled out my Zoli Zouave for inspection. The sight would have to be mounted further back and on the stock rather than on the tang to avoid interference with the hammer.

1661545091648.jpeg
 
I pulled out my Zoli Zouave for inspection. The sight would have to be mounted further back and on the stock rather than the tang to avoid interference with the hammer. <<img removed as unnecessary duplication>>
Got a Zoli Zouave variant built for Navy Arms known as the "Buffalo Hunter" and was hoping for such a solution.
Alas, not to be.
Taggage to see if there is a resolution to this.
Great looking product. Still interested if there is a way to get it to fit...
 
I will ship to Canada, however by USPS International First Class Mail and the buyer pays the postage.
I live in Australia and when our dollar isn't scaling a mountain against the greenback I'll be keen. Happy to pay postage, when I bought my Lee Shaver sight it was only $6-7 freight. So it's not going to be break the bank for me.

I'll check the dimensions but one of these on my fusil might help me get to that 75 yard hunting range I want.
 
I live in Australia and when our dollar isn't scaling a mountain against the greenback I'll be keen. Happy to pay postage, when I bought my Lee Shaver sight it was only $6-7 freight. So it's not going to be break the bank for me.

I'll check the dimensions but one of these on my fusil might help me get to that 75 yard hunting range I want.
The sight should sharpen target definition very well at 75 yards. i use mine at 100. International First Class mail to "Down Under" should be about $15.00 USD.
 
This sight is being fabricated on an ongoing basis. All orders have been filled at this time and I have three more sights on the bench. Please advise here if you have any questions, but please PM to place an order rather than add a comment on this post.


This folding tang peep sight should be suitable for use on rifles having a tang length between 2" - 3" . It will not work on long, Hawken type tangs. A long tang version is under development.

The base is slotted to allow for differences in tang screw location and is slightly curved so as to lay flat on your curved tang.

Windage is adjustable by turning the pivot screw.

Elevation is adjustable by moving the aperture up or down on the staff.

The aperture disc has been blackened to reduce sun glare.

You should be able to mount the sight using your existing tang screw, however if your trigger plate is threaded 8-32, I find that a flat headed lock bolt works much better. I can provide a polished and browned lock bolt if desired at additional cost. It will be necessary for you to cut it to the proper length.

I have mounted this sight successfully on three different rifle designs as shown in the photo below.

The base is slotted to allow for differences in tang screw location and is slightly curved so as to lay flat on your curved tang.

Windage is adjustable by turning the pivot screw.

Elevation is adjustable by moving the aperture up or down on the staff.

The aperture disc has been blackened to reduce sun glare. Aperture diameter can be made to your specification.

You should be able to mount the sight using your existing tang screw, however if your trigger plate is threaded 8-32, I find that a flat headed lock bolt works much better. I can provide a polished and browned lock bolt if desired at additional cost. It will be necessary for you to cut it to the proper length.

I have mounted this sight successfully on three different rifle designs as shown in the photo below.



View attachment 131533 View attachment 131534 View attachment 131535

The sight is $75 plus $5 for shipping. Add $3.00 if you want the lock bolt. Payment by money order is preferred but I can take Paypal if absolutely necessary. If it does not work on your rifle just send it back for refund.

Peep sights effectively sharpen the target image at longer ranges. Please advise any questions.
are you still making these flip up peep sights
 
I just recieved my sight today. I'm more than pleased with it. I mounted it on my TVM .62 fowler. It can fold down out of sight to use the fowler with shot charges with front sight only, and folded up, leaves plenty of room for adjustment for roundball loads. My application required a slightly longer base to drop it out of sight when folded. It's just what I needed to dial in my roundball loads, as I could never get a repeatable sight picture with no rear sight, and hated the thought of a permanent rear sight for occasional roundball use. Folks..buy with confidence, I'm quite pleased, and had my sight in 7 days from sending payment, and it's much more than my meager machining skills could imagine.
 

Attachments

  • 20230130_165404.jpg
    20230130_165404.jpg
    2 MB · Views: 0

Latest posts

Back
Top