Hello all! I’m brand new to muzzle loading but I’m completely enthralled by it. I’m down around the Annapolis MD area and was wondering who else is in MD? Also plan on building a simple kit for my first rifle and would appreciate any suggestions on any good kit with a lower price tag (the wife isn’t as enthusiastic about this new adventure as I am ha). Thank you all!
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Brand new to muzzleloading, near Annapolis
- Thread starter Bodhi717
- Start date
Help Support Muzzleloading Forum:
William Lincoln
54 Cal.
Welcome from the State of FLA
If at all possible it would be to your advantage to find a muzzle loader club or mentor just to see what is involved, and to observe the loading and firing procedure. Look at all types, cap, flintlock, rifled or smooth bore. It will make your adventure more rewarding and less expensive, rather than unfavorable and money dumped down a rabbit hole. It is rewarding when done right, good luck.
Roundball2319
40 Cal
Welcome. It is an excellent pastime. Read up on the info found on this site. Use the search feature to find post on certain subjects, calibers, smooth bores, rifled bores, flint, or precession, and all manner of historical info. Trust me there is some entertaining and great knowledge on here that will burn hours of reading. Enjoy. I sure do.
- Joined
- Feb 13, 2020
- Messages
- 2,877
- Reaction score
- 6,277
Welcome aboard, I'm in Maryland but can't help you on kit advice.
Welcome, from North Carolina! I stand in awe of all of you who took the plunge by building your own, first.
‘Poet
‘Poet
Phil Coffins
69 Cal.
Welcome. Look at buying a nice used rifle and refinishing it. That is often cheaper the buying a kit.
Where at MD if you don’t mind me asking. Do you know of any good black powder/muzzleloader shows even close to us?
- Joined
- Feb 13, 2020
- Messages
- 2,877
- Reaction score
- 6,277
I'm close to Brunswick, Harpers Ferry WVA. You missed a great antique arms show last month in Gettysburg 
They may have a spring show, I'm not sure. Check of PA gun shows should show it. A big show was always held in Baltimore but the Wu Flu shut it down for 2020 and 2021. I hate Baltimore, I'm happy with going to Gettysburg even if means crossing the Mason Dixon Line and going into Yankee territory 
They may have a spring show, I'm not sure. Check of PA gun shows should show it. A big show was always held in Baltimore but the Wu Flu shut it down for 2020 and 2021. I hate Baltimore, I'm happy with going to Gettysburg even if means crossing the Mason Dixon Line and going into Yankee territory 
Daryl Crawford
50 Cal.
Welcome. "Low price" and "good kit" have a difficult time getting along. "Low-ish priced used rifle that needs care and attention" might be an option.
That said, I don't know what your concept of cheap/lower price is.
I've seen some fellows get older CVA rifles, refinish them, change the lock out (with some wood work needed for fit) and then refinish the lock and barrel.
That said, I don't know what your concept of cheap/lower price is.
I've seen some fellows get older CVA rifles, refinish them, change the lock out (with some wood work needed for fit) and then refinish the lock and barrel.
Welcome!
Hi and welcome from northern New Mexico. There are a lot of really knowledgeable folks here and a ton of information here...enjoy!
William Lincoln
54 Cal.
Welcome from chilly Florida!
Welcome from Maine
Nit Wit
Nit Wit
I'm close to Brunswick, Harpers Ferry WVA. You missed a great antique arms show last month in Gettysburg
My wife and I grew up in PA, her in Lancaster Co and me in York. Gettysburg was almost my backyard and I don’t believe I ever knew they had an antique gun show. I’ll definitely look into that, thank you!
The associated gun clubs of Baltimore used to have a big range complex up near there and I used to belong to the Berwyn Rod and Gun club in Bowie. You might contact those people about gun shows within driving distance. Berwyn was a nice range but I don't know about it now as I moved from Md. years ago.
Well that’s another problem I planned on facing later. My buddies and I usually go over to Delmarva Sporting but it’s a bit of a haul and with two little ones at home I’d like to find something a range a little closer to learn and shot at.
Thank you sir! I’d have to check them out.
johnfrommd
Pilgrim
- Joined
- Aug 16, 2015
- Messages
- 189
- Reaction score
- 146
Welcome. I am also from Maryland. A good club to belong to if you plan to build and shoot muzzleloaders is Marriottsville Muzzleloaders. They shoot at the Associated Gun Club ranges and have a pretty good bunch of members.
