After lots of waiting for a gpr that never showed up I finally got my rifle for my muzzleloader 4-h project so I'm getting started. It's the St.Louis Hawken rifle. I'm making a build album to have and show the judge so I got lots of pics. This is my first rifle build so I'm going to need some help too. Feel free to make suggestions, because now I'm going on common sence but you guys got experience. Well, getting started...............
all the parts layed out
first road block
getting rid of some wood in the way
perfect! just not screwed down(i'll do that later0
not fitting
there was some metal in the way
still snug so...
snug fit!
only half fit in the grove
after some time with a dremel
I'd like to know what the person was thinking when they cut this grove, it's over .5 cm too short
dremel again
good fit!
thats it for day 1
all the parts layed out
first road block
getting rid of some wood in the way
perfect! just not screwed down(i'll do that later0
not fitting
there was some metal in the way
still snug so...
snug fit!
only half fit in the grove
after some time with a dremel
I'd like to know what the person was thinking when they cut this grove, it's over .5 cm too short
dremel again
good fit!
thats it for day 1