Been there, done that…
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Leather sources
- Thread starter Stub
- Start date
Help Support Muzzleloading Forum:
Dunno if this is the place for it or not, but....
Was recently doing some modifications to my possibles bag... actually, mounting a belt knife on the front strap.... but anyway, I needed to punch some holes, but not being a leather worker really, I only had rudimentary tools and did not want to use the awl from my Swiss Army Knife to make holes with if I could avoid it.
Rummaging around in my print shop stuff, I found my Japanese screw punch. This is a tool that traditional bookbinders use to punch holes for things like Japanese four hole stab bound books. This is a very traditional type of bookbinding not normally encountered by most people. In any case, my Japanese screw punch worked just fine on the leather I needed to put holes in.
If any of you leather-working folks want to try one, here is a link: Japanese Push Drill Set (Drill & 9 Bits) There is a knock-off sold on Amazon, but I'm given to understand that the quality is not the same. As I had hoped to print and bind my own books, I wanted a tool that would last more than one book, so I spent the extra dollars for the original.
Was recently doing some modifications to my possibles bag... actually, mounting a belt knife on the front strap.... but anyway, I needed to punch some holes, but not being a leather worker really, I only had rudimentary tools and did not want to use the awl from my Swiss Army Knife to make holes with if I could avoid it.
Rummaging around in my print shop stuff, I found my Japanese screw punch. This is a tool that traditional bookbinders use to punch holes for things like Japanese four hole stab bound books. This is a very traditional type of bookbinding not normally encountered by most people. In any case, my Japanese screw punch worked just fine on the leather I needed to put holes in.
If any of you leather-working folks want to try one, here is a link: Japanese Push Drill Set (Drill & 9 Bits) There is a knock-off sold on Amazon, but I'm given to understand that the quality is not the same. As I had hoped to print and bind my own books, I wanted a tool that would last more than one book, so I spent the extra dollars for the original.
Similar threads
