You can become a Supporting Member which comes with a decal or just click here to donate.
The tang appears similar to a fowler and I think we can make it work with an extra long sight base.Do you think this would work on a centermark fusil de chasse?
Tom, are you still fabricating or taking orders for these peep sights?This sight is being fabricated on an ongoing basis. All orders have been filled at this time and I have three more sights on the bench. Please advise here if you have any questions, but please PM to place an order rather than add a comment on this post.
This folding tang peep sight should be suitable for use on rifles having a tang length between 2" - 3" . It will not work on long, Hawken type tangs. A long tang version is under development.
The base is slotted to allow for differences in tang screw location and is slightly curved so as to lay flat on your curved tang.
Windage is adjustable by turning the pivot screw.
Elevation is adjustable by moving the aperture up or down on the staff.
The aperture disc has been blackened to reduce sun glare.
You should be able to mount the sight using your existing tang screw, however if your trigger plate is threaded 8-32, I find that a flat headed lock bolt works much better. I can provide a polished and browned lock bolt if desired at additional cost. It will be necessary for you to cut it to the proper length.
I have mounted this sight successfully on three different rifle designs as shown in the photo below.
The base is slotted to allow for differences in tang screw location and is slightly curved so as to lay flat on your curved tang.
Windage is adjustable by turning the pivot screw.
Elevation is adjustable by moving the aperture up or down on the staff.
The aperture disc has been blackened to reduce sun glare. Aperture diameter can be made to your specification.
You should be able to mount the sight using your existing tang screw, however if your trigger plate is threaded 8-32, I find that a flat headed lock bolt works much better. I can provide a polished and browned lock bolt if desired at additional cost. It will be necessary for you to cut it to the proper length.
I have mounted this sight successfully on three different rifle designs as shown in the photo below.
View attachment 131533 View attachment 131534 View attachment 131535
The sight is $75 plus $5 for shipping. Add $3.00 if you want the lock bolt. Payment by money order is preferred but I can take Paypal if absolutely necessary. If it does not work on your rifle just send it back for refund.
Peep sights effectively sharpen the target image at longer ranges. Please advise any questions.
Yes, the sights are being made to order.Tom, are you still fabricating or taking orders for these peep sights?
PM sent.Hi Tom, I would like to order one of your folding peep sights. Do you take Venmo or do you prefer that I mail you a check?
The staff is free to move to any desired angle and is retained by tension in the pivot hinge.hi mr hawk, is the detent to hold sight open adjustable to work with different tang angles to keep the sight a right angle with the barrel
Click on the envelope icon at the upper right corner of your screen and you will be able to start a conversation with him.I am interested in purchasing one of your sights but I can’t find out how to private message you. Can you give me a hint as to how I should proceed? Thanks
Another way is to hover over his avatar, a pop up will open and down at the lower right tap/click on start conversation.Tom a hawk, I am a new member and can’t figure out how to PM you. Can you help me? Interested in your peep.
PM SentBro that is a winner you get one for a tc hawken or pa hunter xarbine im a buyer
Enter your email address to join: