-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
CVA style brass ramrod end for 9mm rod ?
- Thread starter kyron4
- Start date
Help Support Muzzleloading Forum:
Check Track of the wolf I just got ramrod and tip from them.
What's the gun you need it for?
Deercreek Products.
TOW has 9mm rod fittings, and hickory rods, and also PVC 9mm rods.
If you build your own rods, make sure you put cross pins thru the rod ends, and rods, or you will have a nasty awakening.
Dave
If you build your own rods, make sure you put cross pins thru the rod ends, and rods, or you will have a nasty awakening.
Dave
It's for a Traditions Hawken rifle.
I may have to go with the TOW end even though they are not flared. I have a set of Treso ends but they are for 3/8" , I may try turning them down for a smooth transition to the 9mm rod.
I may have to go with the TOW end even though they are not flared. I have a set of Treso ends but they are for 3/8" , I may try turning them down for a smooth transition to the 9mm rod.
