BS I looked at your web sight and was wondering how do you attach barrel to reciever on your underhammers. You have 2 sight set ups on there. One has the sight on a lever attached to the barrel the others are attached to the tang. Is there a advantage to attaching the sight to the barrel? Does the connection between the barrel and reciever change any and move the inpact of the bullets?
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
bs underhammer
- Thread starter David454
- Start date
Help Support Muzzleloading Forum:
- Joined
- Jan 27, 2004
- Messages
- 1,678
- Reaction score
- 382
I have never done a real "repeatability test" on my sights.
I do know that they are very close, cause I have never noticed any change in the point of impact. Doesn't really matter, because I have a new and simpler way of mounting. [secret stuff]
As far as the cantilever mount......I made it so that my brother could mount it on his receiver and have it sighted in!..........Other Wise..............you have two choices.........make a peep for each barrel and number it, or mount it solid to each barrel and forget about it. [should always be sighted in]
If I could see better, I would just use open sights on each barrel.
I do know that they are very close, cause I have never noticed any change in the point of impact. Doesn't really matter, because I have a new and simpler way of mounting. [secret stuff]
As far as the cantilever mount......I made it so that my brother could mount it on his receiver and have it sighted in!..........Other Wise..............you have two choices.........make a peep for each barrel and number it, or mount it solid to each barrel and forget about it. [should always be sighted in]
If I could see better, I would just use open sights on each barrel.
Similar threads
