- Joined
- Aug 27, 2004
- Messages
- 2,995
- Reaction score
- 6,400
I posted an earlier thought on making a patchbox. (Dec 5, Making the knuckles of PB hinge out of tubing) Thoughts don't always work out, but here is my finshed patchbox. I knew ahead of starting fabrication that a steel 1/16" pivot would end up getting soldered to the work, so I used aluminum to solder and then replaced the aluminum with steel for a finshed PB.
Larry
PS. The solder you see will be against the inside, sidewall of the PB cavity if you didn't know.
Larry
PS. The solder you see will be against the inside, sidewall of the PB cavity if you didn't know.