• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD 50 Cal Target Rifle (reduced)

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Oct 5, 2021
Messages
1,097
Reaction score
1,302
Location
SE PA
Up for sale is a hefty 11 pounds of dedicated target shooting. This percussion gun has a 36 ½ inch barrel by Goode, in 50 cal, with a fast twist. Bore is in excellent condition, no pits and crisp rifling. Barrel is finished bright, with 1 1/8 inch across the flats. Front and rear are adjustable Redfield sights. Top flat is signed by maker Philip Lines. I could not find any information on Mr Lines, but given the components this gun was likely made in the 70s or 80s.

The lock is by HW Robbins, considered a high quality lock of its day with a forged main spring and machined (rather than cast) internal parts. Lock plate has also been polished bright, with a bit of persistent crud under the hammer but otherwise clean and free of corrosion.

Metal to wood finish throughout the gun is excellent. Parts fit precisely, with a brass buttplate, toe guard, trigger guard and small cap on the forestock. This gun has no provision for a ramrod. Forestock has a couple bruises in the wood, generally only visible up close. There is one small dark spot behind the cheek rest

I will note that the gun will not cock unless the set trigger is engaged first. Given the excellent fit and finish of the rifle, I imagine this was intentional to make the main trigger as light as possible and contact with the sear arm as fast as possible. As a bench gun it would only be cocked and capped at the time of firing, and the gun would not be carried in a half-cock position with a cap on the nipple.

LOP is 13 ½, overall length is 54.

Asking $1050 $975 shipped in the lower 48 USA. PM for details.
 

Attachments

  • PXL_20230727_223152554.jpg
    PXL_20230727_223152554.jpg
    1.6 MB · Views: 6
  • PXL_20230727_223208238.jpg
    PXL_20230727_223208238.jpg
    1.5 MB · Views: 0
  • PXL_20230727_223222854.jpg
    PXL_20230727_223222854.jpg
    3.5 MB · Views: 0
  • PXL_20230727_223227366.jpg
    PXL_20230727_223227366.jpg
    2.4 MB · Views: 0
  • PXL_20230729_205013012.jpg
    PXL_20230729_205013012.jpg
    2 MB · Views: 0
  • PXL_20230729_205028413.jpg
    PXL_20230729_205028413.jpg
    3.7 MB · Views: 0
  • PXL_20230729_205032344.jpg
    PXL_20230729_205032344.jpg
    2.4 MB · Views: 0
  • PXL_20230729_214115198.jpg
    PXL_20230729_214115198.jpg
    3.1 MB · Views: 0
  • PXL_20230729_214117518.jpg
    PXL_20230729_214117518.jpg
    3.4 MB · Views: 0
Last edited:
A few more photos. Photos of the forestock show the couple dings, and dark spot near butt.
 

Attachments

  • PXL_20230729_234131394.jpg
    PXL_20230729_234131394.jpg
    1.8 MB · Views: 0
  • PXL_20230729_233913824.jpg
    PXL_20230729_233913824.jpg
    1.7 MB · Views: 0
  • PXL_20230729_205229957.jpg
    PXL_20230729_205229957.jpg
    3.2 MB · Views: 0
  • PXL_20230729_205210227.jpg
    PXL_20230729_205210227.jpg
    2.7 MB · Views: 0
  • PXL_20230729_205201254.jpg
    PXL_20230729_205201254.jpg
    2.8 MB · Views: 0
  • PXL_20230729_205059161.jpg
    PXL_20230729_205059161.jpg
    3.6 MB · Views: 0
  • PXL_20230729_205051268.jpg
    PXL_20230729_205051268.jpg
    3.5 MB · Views: 0
  • PXL_20230729_205040565.jpg
    PXL_20230729_205040565.jpg
    2.9 MB · Views: 0
  • PXL_20230729_205037000.jpg
    PXL_20230729_205037000.jpg
    3.1 MB · Views: 0
Last edited:
I just saw this. Kind of sorry I missed it. This was a very good deal, considering the quality of the components and construction. I think it was probably somebody’s buffalo match rifle. It looks like a real nice rifle.

Congratulations to both buyer and seller!

Notchy Bob
 
Last edited:
Status
Not open for further replies.
Back
Top