SOLD Left Hand 58 cal. Flintlock Mountain Rifle $700

[Jag]

Sold pending receipt of funds. No maker marks on the gun, including barrel and lock. 34 inch barrel, 1 inch across the flats, 14 inch length of pull, very good to excellent bore. Rifle weighs 9 lbs. Double set triggers, lock can't be cocked until the triggers are set. Look at the close up of the left side with lock screw removed you will see a hair line crack, it does not appear to go through to the lock plate side, some time ago I did let some thin CA glue wick in, same glue that I use to build models. $700 plus $50 for shipping, shipping less you pay less, if shipping is more I will cover it. Message for more pictures.

 

[BigSkyRambler]

No maker marks on the gun, including barrel and lock. 34 inch barrel, 1 inch across the flats, 14 inch length of pull, very good to excellent bore. Rifle weighs 9 lbs. Double set triggers, lock can't be cocked until the triggers are set. Look at the close up of the left side with lock screw removed you will see a hair line crack, it does not appear to go through to the lock plate side, some time ago I did let some thin CA glue wick in, same glue that I use to build models. $700 plus $50 for shipping, shipping less you pay less, if shipping is more I will cover it. Message for more pictures.

Very nice for those lefties out there.

 

[flintlock lover.]

Is this rifle still available?
It's caliber?

 

[Jag]

Yes it is! 58 caliber

 

[BigSkyRambler]

I could almost firce myself to shoot Left-Handed for this. Just something about a halfstock plains rifle.

 

[ADK Bigfoot]

Can you send some measurements? You provided Length of pull; I would like drop at comb, drop at heel. Fit is everything!

ADK Bigfoot

 

[Jag]

Heel 3 1/4 Comb 1 1/5

 

[victor#0]

How come you have to set the trigger to cock it? There are two pictures which show the rear sight and each one has a different style rear sight? Is this made from a kit? Thanks...................

 

[Jag]

My understanding is rifles can be built both ways with trigger set or not to cock it. What you think is a rear sight is something I put under the barrel. I don't know who built it or how it was built. I am at least the third owner.

 

[jm076073]

No maker marks on the gun, including barrel and lock. 34 inch barrel, 1 inch across the flats, 14 inch length of pull, very good to excellent bore. Rifle weighs 9 lbs. Double set triggers, lock can't be cocked until the triggers are set. Look at the close up of the left side with lock screw removed you will see a hair line crack, it does not appear to go through to the lock plate side, some time ago I did let some thin CA glue wick in, same glue that I use to build models. $700 plus $50 for shipping, shipping less you pay less, if shipping is more I will cover it. Message for more pictures.

Hi Jag, I’m interested if this is still available.

 

[Jag]

Sold pending receipt of funds