• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

FOR SALE Zouave target rifle

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 15, 2017
Messages
368
Reaction score
261
1970 Zoli .58cal Zouave. Nice condition with a mirror bore. New nipple installed that you can unscrew with your finger. Target sights installed, if yo know anything about Zouaves they all shoot 8 feet high. This one shoots point of aim. See target. Shot at 75 yards off the bench. 3 shots in right corner was after I adjusted sights. Ramrod is a little bent but no big deal. Comes with some .562 round balls and worm. $500 shipped, Open to Trades. Thanks for looking, rick
 

Attachments

  • IMG_2388.jpeg
    IMG_2388.jpeg
    2.1 MB · Views: 5
  • IMG_2389.jpeg
    IMG_2389.jpeg
    1.5 MB · Views: 0
  • IMG_2390.jpeg
    IMG_2390.jpeg
    1.6 MB · Views: 0
  • IMG_2391.jpeg
    IMG_2391.jpeg
    2.1 MB · Views: 0
  • IMG_2392.jpeg
    IMG_2392.jpeg
    1.8 MB · Views: 0
  • IMG_2393.mov
    1.5 MB
  • IMG_2417.jpeg
    IMG_2417.jpeg
    1.9 MB · Views: 0
  • IMG_2416.jpeg
    IMG_2416.jpeg
    2.1 MB · Views: 0
  • IMG_2414.jpeg
    IMG_2414.jpeg
    1.6 MB · Views: 0
  • IMG_2413.jpeg
    IMG_2413.jpeg
    1.6 MB · Views: 0
Last edited:
IMG_2412.jpeg
 

Attachments

  • IMG_2403.jpeg
    IMG_2403.jpeg
    1.8 MB · Views: 0
  • IMG_2406.jpeg
    IMG_2406.jpeg
    1.4 MB · Views: 0
  • IMG_2411.jpeg
    IMG_2411.jpeg
    2.4 MB · Views: 0
  • IMG_2410.jpeg
    IMG_2410.jpeg
    1.3 MB · Views: 0
  • IMG_2405.jpeg
    IMG_2405.jpeg
    1.6 MB · Views: 0
  • IMG_2404.jpeg
    IMG_2404.jpeg
    1.6 MB · Views: 0
IMG_2402.jpeg
 

Attachments

  • IMG_2401.jpeg
    IMG_2401.jpeg
    1.7 MB · Views: 0
  • IMG_2400.jpeg
    IMG_2400.jpeg
    1.6 MB · Views: 0
  • IMG_2399.jpeg
    IMG_2399.jpeg
    1.8 MB · Views: 0
  • IMG_2398.jpeg
    IMG_2398.jpeg
    1.9 MB · Views: 0
  • IMG_2397.jpeg
    IMG_2397.jpeg
    1.7 MB · Views: 0
  • IMG_2396.jpeg
    IMG_2396.jpeg
    1.7 MB · Views: 0
  • IMG_2395.jpeg
    IMG_2395.jpeg
    1.6 MB · Views: 0
  • IMG_2394.jpeg
    IMG_2394.jpeg
    1.7 MB · Views: 0
  • IMG_2393.mov
    1.5 MB
When buying a replacement ramrod, be sure you're getting a correct diameter. I spent a lot on a Dixie rod for the Ms. rifle, listed as "exact repro of original" and it's a full 1/16" too thin.
 
Back
Top