• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

What Muzzleloading Stuff Did You Do Today?

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
My wife came home with these yesterday. Unfired 12 gauge New Englander with changeable choke tubes.
She complains her current trap gun, a CVA Trapper is to light. IC in it should work good for 10 yard trap, Need to order a full for handicaps. Patriot is in excellent shape too.


. image0.jpegimage1.jpeg
 
Recently acquired a ASM 1851 Navy (in .44 fantasy) and ASM 1860 Army. They both needed milling marks polished out, action parts polished and smoothed, minor corrections to fit, stripped old cold blue and re-blued. Went to the range.
IMG_3864.jpeg
First to targets are the 1851, six shots, followed by six more.IMG_3860.jpegIMG_3861.jpeg
Next two are the 1860

IMG_3863.jpegIMG_3862.jpeg
Last is me making smokeIMG_3866.jpeg
Date stamp on both 1998.
Spent the night cleaning the rascals!
 
My wife came home with these yesterday. Unfired 12 gauge New Englander with changeable choke tubes.
She complains her current trap gun, a CVA Trapper is to light. IC in it should work good for 10 yard trap, Need to order a full for handicaps. Patriot is in excellent shape too.


.View attachment 298822View attachment 298823
Wish my Wife would bring something like these home!
 
Last Friday was able to shot my 36cal Lyman. Had to adjust the rear site some but shot good. Using 25grans 3ff black and round ball at 35 feet then out to 45 feet. It put that ball all the way through that 1inch treated deck board and kept going. Showed me the power of black powder.
20240223_124530.jpg
20240223_124503.jpg
 

Attachments

  • 20240223_124442.jpg
    20240223_124442.jpg
    2.2 MB · Views: 0
Last Saturday got out my 44cal but used pyrodex P . Shot 35gr. And round balls. Shot first 15 yards putting that ball through that treaded deck board. Then went out to 25yards put a 1/4 inch plywood it front of the treaded deck board. Still went all the way through ,then buried it self in to the ash log used for a backstop. Showing me again the power of black powder. Last three shots I used the black power with 37gr. Same results. Friday was only able to shoot 3 rounds with the BP before needing cleaning. With the pyrodex P
20240226_145358.jpg
20240226_145151.jpg





was able to shoot 4 rounds then was needing a cleaning.
 

Attachments

  • 20240226_145113.jpg
    20240226_145113.jpg
    7 MB · Views: 0
Shot my new 1863 pocket model. Accuracy was pretty horrible but it did indeed go bang all 4 times on the first Hammer strike .

.323 rb from Wolf track and 4f Swiss 10 g.

About 75% of an empty 9mm casing for a measure.

The sprues on the rb are giant but after loading off the gun, hammering the ball home with a one lbs lead ingot, the proud sprue was a flat spot anyway.
 
Just received a Pietta 1860 Army today that I ordered from Midway. Nice looking pistol. Came with extra cylinder. Box it came in has a Taylor and Co. logo. However it needs a major cleaning and polishing job. Everything is so stiff and tight. Will tackle the project the end of this week as I will be stuck indoors with a big storm heading our way.
 
A pair of 1880 shotgun locks arrived from eBay uk £19 plus £4 postage I wanted a spring for a percussion lock , Yes it will fit, happy with that , lots of good bits for stock
Yes a cheap spring.
Hammer from my scrap box
I wish you all well
 

Attachments

  • CD64D8EA-CA14-4363-B2B1-060F34A43C1F.jpeg
    CD64D8EA-CA14-4363-B2B1-060F34A43C1F.jpeg
    3 MB · Views: 0
  • EDAA290F-9F28-40F0-938D-1A56C8B038F9.jpeg
    EDAA290F-9F28-40F0-938D-1A56C8B038F9.jpeg
    2.6 MB · Views: 0
  • 1A654F48-9373-4C20-A0FE-2725840777A1.jpeg
    1A654F48-9373-4C20-A0FE-2725840777A1.jpeg
    2.6 MB · Views: 0
Back
Top