markdwhite15
Chopper
I want to reshape the comb on my Investarms Hawken rifle but not do a full refinish. Anyone know what the factory finish is? Or a suitable substitute?
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Stock finish
- Thread starter markdwhite15
- Start date
Help Support Muzzleloading Forum:
I redid a patch box inlet my nephew royally messed up on a GPR, this included refinishing that side of the stock and making it match the factory finish.
I used some dilute walnut husk stain I had (light coats) and 4 coats of Tru-oil put on with a scotch bright pad to make it a satin finish, it was a perfect match. The reflection from a very bright LED shop light makes the finish look shiny but it isn't.
I used some dilute walnut husk stain I had (light coats) and 4 coats of Tru-oil put on with a scotch bright pad to make it a satin finish, it was a perfect match. The reflection from a very bright LED shop light makes the finish look shiny but it isn't.
Similar threads
