I'm calling this a kit because you only need to add a barrel, repair the walnut stock and rebuild the lock. <G> I buy ones like this to practice my rebuild, repair, restorations. If I don't do well with this type, I've stayed in my talent range and not harmed anything that deserves better than I can do.
I need to thin down my project rack and thought I would throw this out there to see if there is any interest.
I'm asking $50 + $20 mailing to the lower 48 states.
The stock is around 30" long,
buttstock is 4" high x 11/4" wide
The walnut stock is solid but needing the wood at the top of the lock repaired and replaced on the opposite side. It needs a sliver of walnut replaced on the side of the fore stock.
The lock is fully functional but nees a rebuild and tuned.
Please see the photos and private message me with questions.
Thanks,
O.R.
I need to thin down my project rack and thought I would throw this out there to see if there is any interest.
I'm asking $50 + $20 mailing to the lower 48 states.
The stock is around 30" long,
buttstock is 4" high x 11/4" wide
The walnut stock is solid but needing the wood at the top of the lock repaired and replaced on the opposite side. It needs a sliver of walnut replaced on the side of the fore stock.
The lock is fully functional but nees a rebuild and tuned.
Please see the photos and private message me with questions.
Thanks,
O.R.
Attachments
-
IMG_4867.jpg83.7 KB · Views: 5
-
IMG_4868.jpg140.8 KB · Views: 0
-
IMG_4869.jpg59.5 KB · Views: 0
-
IMG_4870.jpg137.2 KB · Views: 0
-
IMG_4871.jpg162.8 KB · Views: 0
-
IMG_4872.jpg173.6 KB · Views: 0
-
IMG_4873.jpg151.4 KB · Views: 0
-
IMG_4874.jpg94.8 KB · Views: 0
-
IMG_4875.jpg76.7 KB · Views: 0
-
IMG_4876.jpg151.7 KB · Views: 0