Need ID,Info, & main spring two barreled .45 percussion

[utahhntnful]

I acquired a 2 barrel over/under ( manually rotating ) .45 cal. grooved percussion rifle,
the only ID on it, is on the side of the lock, it says warranted.
I also need to locate/have made a new main spring. for it.
If I knew how add pictures I would.

 

[Zonie]

Upload your picture files to a photo storing web site like Photobucket.

Copy the link address they assign to a picture. The correct link name will start with {IMAGE}

Paste the link address into your post here.

 

[Grimord]

I have the same gun I believe. I ordered a spring from Dixie and filed it to fit.

 

[Rev_William]

Without a pic it sounds like a numerich arms like my dad had back in the 70's spring broke and he tried a long time to find a replacement.

 

[nwtradegun]

here is a picture of lock parts http://www.gunpartscorp.com/Manufa...MuzzleloadingRifles-36550/OverUnder-37479.htm

 

[Grimord]

I have the same gun. I could not find a lock spring, so I ordered a spring with similar dimensions from Dixie Gun Works, filed and cut to match the original. It works fine.

This is not a very good lock to begin with, but the gun is serviceable and shoots well.

Fyrstyk