Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
how can you go about fixing this inlay i tried wood glue and saw dust makes it stand out like a sore thumb.. i used wood alone and still looks like hell.. the other 2 came out ok.. got chisel happy. thanks michael
I would agree with Poker, I would recut a new brass inlay slightly larger, remove the old brass, and carefully inlet the new piece over the existing position.
Everyone is telling you the same suggestion. There is no way to repair what you have in place. The brass needs to be made larger to cover the voids adjacent to the inlay. The other choice is cut the stock down and reshape, provided there is ample wood.
Good Luck
Flintlocklar
That inlay looks like something I might have done. You are stealing my title as the wustuest inlayer ever. Suggestions offered are best solution. However, if you are determined to do a repair, I suggest you buy and use a wood filler called Timber Mate. It is far and away the best wood filler product on the market. Can be bought in shades and even have stain added to match what is being repaired. Good luck.