- Joined
- Dec 25, 2011
- Messages
- 8,787
- Reaction score
- 3,778
I finally got around to getting out to the range today and borrowed a set of Ruger inserts to copy and mill out for the 60 grip frame. I'm using half inch thick polycarbonate for the Ransom Insert body and will mold the grip frame into the milled out insert cavity with auto windshield Urethane rubber. It's pretty much an experiment and if successful I want to find out if a short arbor is as accurate as the same gun with end fitted arbor. I'll test with the gun as is and then end fit the arbor tight and see if accuracy is improved , denigrated or unchanged.
Should be an interesting project if successful and will post results of group shooting . I will use all six cylinders not just the most accurate one.
I also may do some bench group shooting over sand bags for comparison.
Should be an interesting project if successful and will post results of group shooting . I will use all six cylinders not just the most accurate one.
I also may do some bench group shooting over sand bags for comparison.