• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Hawken Pineapple patchbox spring

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

groundhoginwv

32 Cal.
Joined
Sep 12, 2010
Messages
29
Reaction score
0
Guys,
Sorry if this has been covered but I searched a zillion differnt ways and could not find it. I have a Steel Pineapple Early Hawken patchbox with a flat cam over type spring and I dont know how the spring is to be installed.
http://www.trackofthewolf.com/Cate...=14&subId=151&styleId=582&partNum=PB-HAWK-2-I
I have been searching for two weeks now for any instructions on how this type of spring should mount. Any help would be appreciated and those with a picture would be most welcome. Thanks.
 
Last edited by a moderator:
Well, your link has about the best instructions I've seen. The spring fit's under the hinge.
I don't think it was designed to snap the lid all the way open.
 
Back
Top