FOR SALE Folding Peep Sight

[Tom A Hawk]

Update: All January orders are now up to date and new parts are on the bench. Good time to order for quick delivery.

 

[Flintgun]

This sight is being fabricated on an ongoing basis. All orders have been filled at this time and I have three more sights on the bench. Please advise here if you have any questions, but please PM to place an order rather than add a comment on this post.


This folding tang peep sight should be suitable for use on rifles having a tang length between 2" - 3" . It will not work on long, Hawken type tangs. A long tang version is under development.

The base is slotted to allow for differences in tang screw location and is slightly curved so as to lay flat on your curved tang.

Windage is adjustable by turning the pivot screw.

Elevation is adjustable by moving the aperture up or down on the staff.

The aperture disc has been blackened to reduce sun glare.

You should be able to mount the sight using your existing tang screw, however if your trigger plate is threaded 8-32, I find that a flat headed lock bolt works much better. I can provide a polished and browned lock bolt if desired at additional cost. It will be necessary for you to cut it to the proper length.

I have mounted this sight successfully on three different rifle designs as shown in the photo below.

The base is slotted to allow for differences in tang screw location and is slightly curved so as to lay flat on your curved tang.

Windage is adjustable by turning the pivot screw.

Elevation is adjustable by moving the aperture up or down on the staff.

The aperture disc has been blackened to reduce sun glare. Aperture diameter can be made to your specification.

You should be able to mount the sight using your existing tang screw, however if your trigger plate is threaded 8-32, I find that a flat headed lock bolt works much better. I can provide a polished and browned lock bolt if desired at additional cost. It will be necessary for you to cut it to the proper length.

I have mounted this sight successfully on three different rifle designs as shown in the photo below.



View attachment 131533 View attachment 131534 View attachment 131535View attachment 271872

The sight is $75 plus $5 for shipping. Add $3.00 if you want the lock bolt. Payment by money order is preferred but I can take Paypal if absolutely necessary. If it does not work on your rifle just send it back for refund.

Peep sights effectively sharpen the target image at longer ranges. Please advise any questions.

I’m interested in purchasing your peep sight. Can you pm information so I can mail payment

 

[Tom A Hawk]

PM sent

 

[Tom A Hawk]

Crockett shooters please note - I have recently been advised that the Crockett rifle requires a different screw size. Please be sure to let me know if ordering for a Crockett. Thanks.

 

[Tom A Hawk]

Update:

- All peep sight orders have been completed. Two more are in process on the bench.

- NEW Fowler tang sight
* Attaches with existing tang screw
* Adjustable for elevation by moving forward or back
$29 by Paypal or money order. Please send PM with any questions.