Double set triggers

[brianpa40]

I was given a TC Renegade and wanted to put a L&R replacement lock in it but now half the time I set the rear trigger the front one just clicks then I reset the back and then the front will fire. Any suggestions would be appreciated.

 

[EC121]

The sear on the replacement lock is in a different place than the original. Probably lower on the plate than the T/C and riding the trigger blades. You might try shimming the trigger bar out with a thin piece of wood or thick paper on each end. The sear bar might also be hitting the wood and not moving like it should. Smoke it with a candle flame, install it, work it a couple of times, remove it and look for the black.

 

[brianpa40]

thanks EC121 will do

 

[brianpa40]

Just had to remove a little more wood at the sear arm.