• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Another Combustible Cartridge Thread

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
So far I am using round ball.
My round ball cartridges easily fit in my 58, 60 and walker. The 60 is a bit snug due to rubbing against the barrel. They fit my .44 cal 51 also, would've taken a pic but it's in a case under a case under a case......😂
20240225_180001.jpg
 
My round ball cartridges easily fit in my 58, 60 and walker. The 60 is a bit snug due to rubbing against the barrel. They fit my .44 cal 51 also, would've taken a pic but it's in a case under a case under a case......😂View attachment 298342
Good to know. TYVM (thank you very much) Buying kit. I emailed GOTW for a dual kit for 1860 and 1847 Walker. I need to call them and they will put together kit.
 
Can you mount these cartridges in the cylinder is still in the pistol? I am thinking for 1860 Army and Walker .44. I'd be using round balls.
Bill I load my paper cartridges while cylinder is still in the revolver.
As others state, makes reloading at the range much faster.
Relic shooter
 
Last night I ordered a belt pouch off eBay. Search for "CIVIL WAR US CSA PISTOL REVOLVER .36 Caliber AMMO AMMUNITION POUCH-BLACK LEATHER".

I also made up some .36 caliber rounds for my Uberti 1851 Navy. For these I used Zig Zag rolling papers for the tubes but with the base discs included with the GOTW kit.

View attachment 60162

A downside that I noticed when making cartridges using this method (i.e., paper twisted over the ball) is that it's difficult to impossible to keep the sprue up. I'll need to see if/how this affects accuracy. I suspect it'll be fine for plinking or shooting at an 8" steel plate from ~10 yards.
We can smoke those by the campfire
 
Back
Top