Rebel
Cannon
The problem i found was when you put it on half cock to turn the cylinder. You can hear the click and see the trigger move forward a little. But it doesn't click all the way into the half cock notch unless you push forward on the trigger, and then you can see the hammer move forward some more. And it will drop the hammer if you pull the trigger unless i push the trigger forward. I completely disassembled it and stoned the hammer and trigger as well as the bolt and bolt cut in the frame but it still does it. The Bolt/trigger spring is not broken. Any ideas as to the problem? Could the trigger spring side of the spring be putting too much, or not enough, pressure on the trigger?