Tested 3f T7 in a T/C Hawken caplock without a BP ignition charge. Tentatively successful pending more testing. Stay tuned.
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
What Muzzleloading Stuff Did You Do Today?
- Thread starter PathfinderNC
- Start date
Help Support Muzzleloading Forum:
Awfully hard to beat a Lab as a companion. I have had three.
- Joined
- Dec 26, 2021
- Messages
- 483
- Reaction score
- 760
Did a multitasking day
1 Cleaned polished, filled the firing cone priming flask with FFFFg Du Pont powder.
2. Cleared the firing path on my Sharps carbine using two musket caps.
3 loaded ten more paper cartridge tubes for the Sharps
4 Did a little dry firing practice with the Sharps used a dud cap to protect the cone.
5 made a cup of coffee and relaxed.
Also while I was resting adjusted the die set and powder measure for some unmentionable ammunition.
because idle hands are the devils workshop but that don't count!
Pretty good day for an old gaffer
Bunk
1 Cleaned polished, filled the firing cone priming flask with FFFFg Du Pont powder.
2. Cleared the firing path on my Sharps carbine using two musket caps.
3 loaded ten more paper cartridge tubes for the Sharps
4 Did a little dry firing practice with the Sharps used a dud cap to protect the cone.
5 made a cup of coffee and relaxed.
Also while I was resting adjusted the die set and powder measure for some unmentionable ammunition.
because idle hands are the devils workshop but that don't count!
Pretty good day for an old gaffer
Bunk
Friend of mine bought an old 950 CAT loader and fought all week trying to make it run. I went out and helped him for awhile. ALMOST got it running but more importantly I just happened to have my 54 New Englander with me to test some Lee Minnies I just cast. They really smack steel with 90 grains of powder. Good day all around for me anyway!
Got my hunting stuff ready for the last afternoon in a ladder stand for Pa. Flintlock m/l deer season. Being old and unable to go hunting , like I used to , sucks.
- Joined
- Jun 7, 2017
- Messages
- 1,401
- Reaction score
- 1,813
Old wood I'm there with you. I still hunt and hope to for many years to come. I'm 67 now arthritic, diabetic and heart attack survivor with 5 stents. Thankful to God am i! This past opening day 2022 of Indiana gun season it was cold and snowed. I shot a nice buck at about 830 a.m. my fingers were so cold and stiff I couldn't start field dressing. My son came up and field dressed and dragged my buck to the truck. He worries so much about me. I'm so grateful to have him as he is a purple heart recipient (roadside bomb Ramadi iraq) and father to my 2 granddaughters and chubby little grandson
Old wood I'm there with you. I still hunt and hope to for many years to come. I'm 67 now arthritic, diabetic and heart attack survivor with 5 stents. Thankful to God am i! This past opening day 2022 of Indiana gun season it was cold and snowed. I shot a nice buck at about 830 a.m. my fingers were so cold and stiff I couldn't start field dressing. My son came up and field dressed and dragged my buck to the truck. He worries so much about me. I'm so grateful to have him as he is a purple heart recipient (roadside bomb Ramadi iraq) and father to my 2 granddaughters and chubby little grandson
That’s the best story I’ve read all day! I am happy to hear that you are still out there Gidaddy!
WV MZL HUNTER
45 Cal.
- Joined
- Nov 5, 2005
- Messages
- 634
- Reaction score
- 7
I have two out of three labs, one left is 11 and I’m 68. I agree
WV MZL HUNTER
45 Cal.
- Joined
- Nov 5, 2005
- Messages
- 634
- Reaction score
- 7
Flintlock hunted till froze out!
Back this evening.
Back this evening.
60 Years ago it was live fast, die young and leave a good looking corpse. I grew out of that. But do wish I could follow a dog as long and as hard as I used to.
- Joined
- Aug 21, 2004
- Messages
- 1,223
- Reaction score
- 1,721
Next weekend is the Sons of Liberty indoor rendezvous in Jackson Ohio. I'm a member of the club and it is one of my favorite cold weather events to break the cabin fever. I hand made or hand forged several door prizes to give away at the event.
Ohio Rusty ><>
Ohio Rusty ><>
Attachments
Did more testing of 3f Triple 7 in my QLA'ed T/C Hawken .50 caliber. I'm using up the last of my old Hornady Great Plains 410 grain HBSP bullets. Caps were CCI #11 Magnum. Lube, in addition to the dried-out waxy stuff and Styrofoam stuck to it was cooking spray. Today fired four bullets without cleaning from yesterday. Later will clean and perhaps try again with either a Renegade or White Mountain Carbine.
Anyone tried T7 in a flintlock using actual BP in the pan?
Only complaint I have so far is the level of recoil with 70 grains of powder under that heavy bullet. Not really looking forward to the White Mountain Carbine test. Might go with a lighter powder charge. They do shatter plastic bottles nicely though.
Accuracy left a little to be desired, but as I am mostly testing for reliability, I am not worried about load development yet. Just as well... I will not be hunting velociraptors any time soon so won't be needing bullets that heavy.
Just heard about the clouded leopard that somebody let out of the Dallas Zoo. For those not familiar, Neofelis nebulosa, is nearly extinct in the wild. They are sort of a pocket-sized sabre-toothed cat, not nearly as large as the Smilodon genus tended to be.
Sorry, sometimes I get off topic....
Anyone tried T7 in a flintlock using actual BP in the pan?
Only complaint I have so far is the level of recoil with 70 grains of powder under that heavy bullet. Not really looking forward to the White Mountain Carbine test. Might go with a lighter powder charge. They do shatter plastic bottles nicely though.
Accuracy left a little to be desired, but as I am mostly testing for reliability, I am not worried about load development yet. Just as well... I will not be hunting velociraptors any time soon so won't be needing bullets that heavy.
Just heard about the clouded leopard that somebody let out of the Dallas Zoo. For those not familiar, Neofelis nebulosa, is nearly extinct in the wild. They are sort of a pocket-sized sabre-toothed cat, not nearly as large as the Smilodon genus tended to be.
Sorry, sometimes I get off topic....
I shoot lots of T7 in the caplock, but BP only in the flintlock. I only carry 1 powder horn.
Last edited:
TarponStalker
54 Cal.
I ordered a paper cartridge former from Guns of the West. I’ve wanted one for my Pietta .44 for some time now. Dustin was very helpful and pleasant to deal with.
I also had friends over for supper. He’s new to hunting so he gets a lot of questionable info from others.
When I introduced him to two flintlocks and my .54 half stock percussion plains rifle he couldn’t believe his eyes. “ you hunt with that?”
“And here I’m told you must shoot a $&@&&@$”! To kill deer. I told him earlier that I hunt with a flintlock rifle but now I’m thinking he didn’t know what that is.
Possibly a future convert.
I also had friends over for supper. He’s new to hunting so he gets a lot of questionable info from others.
When I introduced him to two flintlocks and my .54 half stock percussion plains rifle he couldn’t believe his eyes. “ you hunt with that?”
“And here I’m told you must shoot a $&@&&@$”! To kill deer. I told him earlier that I hunt with a flintlock rifle but now I’m thinking he didn’t know what that is.
Possibly a future convert.
- Joined
- Apr 9, 2012
- Messages
- 1,797
- Reaction score
- 3,405
...but interesting 'off topic'Did more testing of 3f Triple 7 in my QLA'ed T/C Hawken .50 caliber. I'm using up the last of my old Hornady Great Plains 410 grain HBSP bullets. Caps were CCI #11 Magnum. Lube, in addition to the dried-out waxy stuff and Styrofoam stuck to it was cooking spray. Today fired four bullets without cleaning from yesterday. Later will clean and perhaps try again with either a Renegade or White Mountain Carbine.
Anyone tried T7 in a flintlock using actual BP in the pan?
Only complaint I have so far is the level of recoil with 70 grains of powder under that heavy bullet. Not really looking forward to the White Mountain Carbine test. Might go with a lighter powder charge. They do shatter plastic bottles nicely though.
Accuracy left a little to be desired, but as I am mostly testing for reliability, I am not worried about load development yet. Just as well... I will not be hunting velociraptors any time soon so won't be needing bullets that heavy.
Just heard about the clouded leopard that somebody let out of the Dallas Zoo. For those not familiar, Neofelis nebulosa, is nearly extinct in the wild. They are sort of a pocket-sized sabre-toothed cat, not nearly as large as the Smilodon genus tended to be.
Sorry, sometimes I get off topic....
I made a leather cover for my pocket flask. Feels much better in hand than bare brass.
And it looks SOOO much better! Beautiful!
Tore a CVA Hawken down and found a piece of metal that I have no idea where it came from. My shooting partner was gifted several badly abused ML rifles and we are trying to clean them up. The barrel on the CVA cleaned up and shot really well with clean and intact patches, just worried where the spare part came from.
Ramrod retaining spring-thing?
- Joined
- Mar 23, 2015
- Messages
- 4,896
- Reaction score
- 3,413
Might it be the ramrod retainer spring? It’s a flat curved spring with a loop on one end . It is held in place by the front lock screw.
Similar threads
