• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Dutchish Doglock Pistol

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Alden

Cannon
Joined
May 23, 2008
Messages
6,476
Reaction score
55









My new 1640 era doglock pistol in walnut w/bright iron furniture. Patterned from an example excavated from the Power House site. The lock plate is bellied as w/earlier wheel locks. Such locks are usually associated with the Dutch but they were used by both sides in the ECW and many of these locks have been found in America. Rice .50 caliber smoothbore, 13-1/2", octagon-to-round barrel with a couple of wedding bands. Flintlock has dog as well as has half and full cock. The buttcap is birdseye maple.
 
Not really, although the angle of the wrist is rather exaggeratedly bent downwards and so the angle of the finger to trigger isn't ideal -- one pulls "up" a bit. Bend your wrist down to its lowest position where it is still comfortable... They feel more like a modern specialty target pistol, if you are familiar with that, in this regard in many respects which, in addition to the trigger angle, is ironic too because (and this gets to the point of "aiming" -- play on words intended) they wouldn't even have had any sights.
 
It doesn't come out in the picture well Bill but there is a transition from octagonal to 16-sided (hexadecagonal) via chamfers that lead into the first wedding band. The photos here make it look like a sudden, severe, dropoff to tapered round... In person it is a little more graceful and not so blocky, "machined," looking.
 
Back
Top