SolidLeadSlug
40 Cal
- Joined
- Aug 17, 2021
- Messages
- 132
- Reaction score
- 113
Looking for a sizing die thats .577. Can be homemade or commercial. Just needs to work! Thanks!
-
If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
WANTED .577 sizer
- Thread starter SolidLeadSlug
- Start date
Help Support Muzzleloading Forum:
I have a .576 sizer that is made for a bench press. Will sell for $25 shipped, I can provide photos. PM me if interested. steg49
- Joined
- Jan 9, 2008
- Messages
- 1,894
- Reaction score
- 2,092
Lodgewood has sizing dies. Search their site for push through sizing dies.
- Joined
- Aug 5, 2017
- Messages
- 95
- Reaction score
- 87
Lodgewood also has the threaded dies for use in a press-.577 among other sizes
RogueAdventurist
32 Cal
I just ordered one from Lodgewood (.575) should be here this week. They seemed to be well regarded. Will let you know how it works out.
Now if I can find someone that has a .54 mold and sizer in stock I’ll be good to go!
Now if I can find someone that has a .54 mold and sizer in stock I’ll be good to go!
RogueAdventurist
32 Cal
Follow up:
the Lodgewood .575 threaded sizer works like a champ in my press. I’d say maybe 10% of my castings were oversized to the point the die really did a number on the grooves. Lesson learned and back into the pot they went.
Really can’t recommend the die enough.
Does anyone have a good source for a threaded .541 sizer?
the Lodgewood .575 threaded sizer works like a champ in my press. I’d say maybe 10% of my castings were oversized to the point the die really did a number on the grooves. Lesson learned and back into the pot they went.
Really can’t recommend the die enough.
Does anyone have a good source for a threaded .541 sizer?
Similar threads
