• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bacarper

50 Cal.
Joined
Mar 1, 2015
Messages
94
Reaction score
101
Location
Souhern AZ
Howdy Folks,

Just acquired a new 1851 and looking for some advice: I'm running through Pettifogger's tune up guide and hoping ya'll can recommend a good method to repair the "case hardening" after stoning to break sharp edges? I've used the cold blue and water trick in the past but looking to see if there are any better suggestions out there.

Thanks in advance!
 

Attachments

  • 20240326_150616.jpg
    20240326_150616.jpg
    8.3 MB · Views: 8

Latest posts

Back
Top