Original British Brunswick P-1841 type Early Model Officer Musket - Untouched Condition (Smoothbore)

barnettshale said:

I have bought several items from the IMA Nepal cache over the years and most of them have been worth the effort. Been looking this one over for a few days and decided to order one last Sunday. I arrived by UPS yesterday mid afternoon. Temperature here yesterday afternoon was north of 105 Deg F. As my shop is not fit to enter in this type of weather I decided to wait until this morning to unbox the gun. They always wrap the gun in bubble wrap and pack with foam peanuts. This morning I went out and set the box on the tailgate of my truck and took pictures as I proceeded to take the gun out of the box.
1. Box had a hole in the area of the hammer

View attachment 244476



2. Bubble wrap OK except for the tip of the hammer sticking out. Not bent or damaged
View attachment 244472
3. Muzzle looks good, ramrod present, nose cap present, all barrel keys and plates are present, bore at muzzle measures .712"
View attachment 244478 View attachment 244479
4. Stock with replacement trigger guard, butt plate and patch box
View attachment 244480
5. Wrist of the stock has a crack and I can fix that. All in all I'm pleased and anxious to get started.
View attachment 244481

Click to expand...

barnettshale said:

Nice and warm today. Took my Brittany/GSH pup out in the grass and sun. While he enjoyed that I pulled out the Brunswick stock to try and get it cleaned up a bit more. The wrist is cracked from the comb down at about a 35/40 degree angle through the middle of the lock mortise to just about directly underneath the lock screw.
View attachment 298679
The only other crack is at the foreend nose from the most forward ramrod thimble to the nose cap. Only other stock repair needed is to replace the chip out of the stock toe. I will order Starbond medium and thick tonight. I have some walnut sanding dust to add to the cracks when I apply the Starbond. View attachment 298680View attachment 298681

Click to expand...

barnettshale said:

Used walnut sanding dust and thin Starbond to fill the wrist crack. Really solid now. No flex.
View attachment 312176

Worked to smooth it out.
Then wiped some Old English scratch remover on to see what that would do.View attachment 312180
View attachment 312181

Click to expand...