• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Small Shot Charges To Grains Equivalents

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I'm guessing this is for a smoothbore muzzleloader. If your match shooting you might want to weigh your charges...

Otherwise,
3/8 oz=25grs black powder measure
1/2 oz=35grs black powder measure
5/8 oz= 45grs black powder measure.

These aren't precise, but using a volume measurer you can't get 1/2 grain increments. Remember, black powder is no where near as sensitive as smokeless.

I know firsthand how confusing volume to weight measurements can be.
At a trap match I watched a shooter use an 8 bore. He used 140grs ffg and 2oz (by volume) of shot, using the same measurer
I was ready to argue that he would only get 8 shots from a pound of powder, because he was using 2 scoops of shot, by volume, and 2 scoops of powder, by volume
After i settled down and thought about it, it became clear he got 50 shots (approximately) from a pound.
This is what I'm talking about, thank you.
 
@Grenadier1758 I am using schuetzen 1fg in my pedersoli 10ga SxS

1 5/8 scoop schuetzen Fg
1 1/2 scoop #6 lead shot
This is the pattern I achieve last weekend with the @Skychief loading method
25 yards out of the right/cylinder bore barrel
 

Attachments

  • 20230401_192352.jpg
    20230401_192352.jpg
    1.4 MB · Views: 0
  • 20230401_193000.jpg
    20230401_193000.jpg
    6.2 MB · Views: 0
Last edited:
Am I wrong ? Shot is measured by weight not volume.
No, you are not wrong. But when you know the density of a material, that density can be used to determine the weight of an object by multiplying the volume by the density to determine weight.

120 grains weight of powder takes up a volume of 0.484 in^3.

1 5/8 ounces of lead shot takes up a volume of 0.484 in^3 based on the density of lead shot.
 
Hey @Walkabout Hope this works.
1681166203921.png


For smaller gauges, this fellow has it right-

@Eterry said-

I'm guessing this is for a smoothbore muzzleloader. If your match shooting you might want to weigh your charges...

Otherwise,
3/8 oz=25grs black powder measure
1/2 oz=35grs black powder measure
5/8 oz= 45grs black powder measure.

These aren't precise, but using a volume measurer you can't get 1/2 grain increments. Remember, black powder is no where near as sensitive as smokeless.

I know firsthand how confusing volume to weight measurements can be.
At a trap match I watched a shooter use an 8 bore. He used 140grs ffg and 2oz (by volume) of shot, using the same measurer
I was ready to argue that he would only get 8 shots from a pound of powder, because he was using 2 scoops of shot, by volume, and 2 scoops of powder, by volume
After i settled down and thought about it, it became clear he got 50 shots (approximately) from a pound.
 
I have been working extensively with 28 and 24 gauges. I find they respond best to a 7/8 oz scoop of powder with the same scoop of shot. Less powder, inconsistent patterns and more powder, poor patterns. Similarly, 3/4 oz of shot was my goal but neither gauge (3 guns) is "better" with that amount of shot and any amount of powder.
 

Latest posts

Back
Top