Danny Ross
40 Cal.
- Joined
- Jan 13, 2013
- Messages
- 449
- Reaction score
- 91
I remember those rifles. I didn't think the twist rate came in anything faster than a 1 in 48 twist. :idunno: DANNY
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
What to do with "Sporterized" Hawken?
- Thread starter dsayer
- Start date
Help Support Muzzleloading Forum:
- Joined
- Mar 20, 2018
- Messages
- 433
- Reaction score
- 34
Hmm... Will check this tonight. Dad has always said it was a fast twist barrel but I've never fully confirmed that. It "feels" like it spins faster than my other Cabela's rifle, which is 1:48. But maybe that's just because I expect it to... :idunno:
I have 4 sporterized cabelas hawkins and all are 1-48 and quite accurate. Chrome lined too. Gottem all in early to mid 1990's.
- Joined
- Jun 12, 2005
- Messages
- 7,970
- Reaction score
- 964
if he's of an appropriate age, I would teach your son how to restock it ”¦ good male bonding stuff and all that.
- Joined
- Mar 20, 2018
- Messages
- 433
- Reaction score
- 34
dsayer said:
It does a little better than 75% of a rotation over 19 inches. Asked Dad and he thought he remembered it being 1:24, which seems about right? :idunno:
Son is just turning 3. So I've got some time to figure this out!!
A rough calculation gives 25.3 inches for a full rotation. It would be easier if you just did a half rotation and doubled the distance. If you did a half rotation and ramrod moved 12 inches, then the rate of twist would calculate to 1 in 24".
Black Jaque Janaviac
40 Cal.
- Joined
- Sep 2, 2009
- Messages
- 535
- Reaction score
- 73
I have had two such rifles that you speak of. To be correct they are "Sporterized Hawken Carbines".
One of mine was a .54 that I never could get to shoot worth a dime. The one I have now is a .50 and it does quite well with either rb or the unmentionables.
For the rb I use a "pistol" charge of about 30 - 35 grains. My Lyman Plains Pistol has 1:30" twist and is meant for RBs. With RB you can usually shoot well out of any twist - you just need to slow 'em down for fast twist. What usually is the problem is the fast twist guns are too shallow for RB.
The stocks are not interchangeable with longer-barreled (and more common) Sporterized Hawkens. The forearm is shorter. You could get a used stock and cut it down to fit.
One of mine was a .54 that I never could get to shoot worth a dime. The one I have now is a .50 and it does quite well with either rb or the unmentionables.
For the rb I use a "pistol" charge of about 30 - 35 grains. My Lyman Plains Pistol has 1:30" twist and is meant for RBs. With RB you can usually shoot well out of any twist - you just need to slow 'em down for fast twist. What usually is the problem is the fast twist guns are too shallow for RB.
The stocks are not interchangeable with longer-barreled (and more common) Sporterized Hawkens. The forearm is shorter. You could get a used stock and cut it down to fit.
