fusil de chase
40 Cal.
- Joined
- Dec 8, 2011
- Messages
- 291
- Reaction score
- 0
My walnut build got side swiped and with lots of winter left I am desperate to start on another build so I dug out some parts that I have been avoiding. A Rase inletted blank with an Oregon Barrel Works tube and a new large siler. When I put these together I was even more ignorant then I am now and thought I wanted a hook breech. Now I just want a regular tang and a nice relaxing fantasy trade gun build. ( a platform to show off my childlike engraving) And of course now I realize just how not simple a hook breech is. I have the hook 90% mated but really not confident in going the other 10%. Also there is lots of bolster interference with the standing breech. Basically not keen on continuing as a hook breech.
[/URL][/img]
So what I am wondering is can a guy get a tang welded onto a plug like this?
[/URL][/img]
The blank is inletted absolutely perfectly so I do not want to rebreech with a new plug. And I don't think I can rebreech better then Joe at TGWs.
If this operation is possible anyone know someone I can trust to do it right?
Thanks again.
So what I am wondering is can a guy get a tang welded onto a plug like this?
The blank is inletted absolutely perfectly so I do not want to rebreech with a new plug. And I don't think I can rebreech better then Joe at TGWs.
If this operation is possible anyone know someone I can trust to do it right?
Thanks again.