• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Pedersoli or ruger

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Aug 23, 2022
Messages
344
Reaction score
423
Location
North Carolina
I have a chance to buy a Ruger new model army or the Pedersoli Remington Pattern Target Muzzleloading Pistol 44.
Both are pricey,however I don't mind paying for quality. Has anyone shot the Pedersoli and how did it compare to the ruger.?
 
I have a chance to buy a Ruger new model army or the Pedersoli Remington Pattern Target Muzzleloading Pistol 44.
Both are pricey,however I don't mind paying for quality. Has anyone shot the Pedersoli and how did it compare to the ruger.?
I have both of those models although the Ruger was made in 76 and the Pietta 58 in early 80's. My Ruger is stock except for a trigger job and Pietta target has been gone entirely through including a trigger job, bore lapping, cylinder throat line bore ream , re-crown and re-cut forcing cone.
The Ruger is accurate but the Pietta will out shoot it.
Get the Ruger they're not made any more. You can pick up a Pietta target much easier !
 
I have a chance to buy a Ruger new model army or the Pedersoli Remington Pattern Target Muzzleloading Pistol 44.
Both are pricey,however I don't mind paying for quality. Has anyone shot the Pedersoli and how did it compare to the ruger.?
I’ve owned a dozen or more Old Armies, and at least 8 of the Pietta Shooters Model remingtons. In my hands I would say they will run neck and neck. In both cases, some of them are just outstanding and some are not but the Pietta Shooters have been more consistently great shooters. I have theories about why some Rugers just don’t live up to their potential. The Pedersoli is supposed to be pretty much equal to the Shooters Pietta both see quite a bit of use in European competitions.


obligatory Remington porn follows…after spending way too much money on it inside and out, that particular gun is very accurate but my old Uberti Colt is its equal, there’s 6 rounds at 50 yards.
IMG_3504.jpeg
IMG_1169.jpeg
IMG_1718.jpeg
 
Last edited:
I’ve owned a dozen or more Old Armies, and at least 8 of the Pietta Shooters Model remingtons. In my hands I would say they will run neck and neck. In both cases, some of them are just outstanding and some are not but the Pietta Shooters have been more consistently great shooters. I have theories about why some Rugers just don’t live up to their potential. The Pedersoli is supposed to be pretty much equal to the Shooters Pietta both see quite a bit of use in European competitions.
I never mentioned pietta.
 
I’ve owned a dozen or more Old Armies, and at least 8 of the Pietta Shooters Model remingtons. In my hands I would say they will run neck and neck. In both cases, some of them are just outstanding and some are not but the Pietta Shooters have been more consistently great shooters. I have theories about why some Rugers just don’t live up to their potential. The Pedersoli is supposed to be pretty much equal to the Shooters Pietta both see quite a bit of use in European competitions.
I never mentioned Pietta.
 
I have both of those models although the Ruger was made in 76 and the Pietta 58 in early 80's. My Ruger is stock except for a trigger job and Pietta target has been gone entirely through including a trigger job, bore lapping, cylinder throat line bore ream , re-crown and re-cut forcing cone.
The Ruger is accurate but the Pietta will out shoot it.
Get the Ruger they're not made any more. You can pick up a Pietta target much easier !
Ooooooooooooops sorry , you said Pedersoli , I was in Pietta mode, Brain fart alert! 😄
 
If you notice the mentions about the 58s state, they have had extensive accurizing work done to them, I have both a Ruger and 58 pietta no pedersolis, so can't respond about those, hands down the Ruger out shoots the stock 58 of mine, I will still say go with the Ruger they are hard to find and demand top prices, depending on what you pay for one you will not lose money and probably make a few dollars if you decide to sell it down the road, they are a sturdy pistol and parts for them can be found if you look hard enough, you can always save and then buy the pedersoli as they will be easier to find.
 
Ruger, Ruger , Ruger, and Ruger. There is NO other revolver that is held in such high esteem on this forum as the Old Army. Just look at the prices being asked to understand that this is the best there is. Some may disagree but they are uneducated trolls who don't dance in the daylight. 🙂
 
I have a chance to buy a Ruger new model army or the Pedersoli Remington Pattern Target Muzzleloading Pistol 44.
Both are pricey,however I don't mind paying for quality. Has anyone shot the Pedersoli and how did it compare to the ruger.?
Ok, I have owned or own a number of 1858s, from original Remingtons, Pietta and Uberti. The Uberti are long gone. I have also owned a number of Ruger Old Model Army, though I have owned no Ruger New Model Army, and I am just not familiar with that particular model. I have not owned the Pedersoli Remington Pattern Target gun, but I have handled and shot one. If you are looking for a ‘1858 Remington’ looking target gun, the Pedersoli may fill the bill, thought the matted/sandblasted finish on the one I shot looked very contemporary. The owner of the gun claimed, though I never confirmed it, that the Pedersoli was made using an Uberti frame and some Uberti parts would fit (for example, he stated an Uberti cylinder would fit his Pedersoli). The Pedersoli was as accurate as the Pietta Target guns I have shot, and similar accuracy could be said of the Rugers, though a lot depends on who is behind the trigger. For me, the big selling point of the Ruger was its durability. I was shooting SASS and while nothing else made it through more that a few matches without human intervention, the Rugers just kept on going. And going.

I am not an expert by any stretch, but @45D probably is, and someone who’s opinion should carry some weigh, likely having handled more cap and ball pistols than most anyone else on the forum. I believe he is the owner of Goons Gun Works.
Goons Gun Works Hopefully Mike will check in and offer his opinion.
 
Pedersoli makes nice guns but I don't care for the finish on that model. I also wouldn't pay the going rate for the Ruger, or even half that, so it would definitely be something else for me.
 

Latest posts

Back
Top