bubba.50
Barefoot Hillbilly
- Joined
- Aug 21, 2010
- Messages
- 3,837
- Reaction score
- 3,343
Very good bore/rifling. Barrel, triggerguard, buttplate need re-browned. Beautiful striped stock. Needs wedges. I replaced all the boogered up screws in the patchbox, wedge plates, triggerguard with brass screws.
Whoever originally started on the stock oversanded a bit so, I shimmed the rear of the triggers out enough for the set trigger to work. But if I shimmed it enough for proper operation the trigger bar/triggerguard will be proud of the stock. Didn’t take them back out to see if enough metal could be removed to fix the problem.
So, with some wedges and a bit of trigger work you’ll be good to go. And with a little re-browning it’ll be awesome looking to boot.
$350.00 shipped lower 48 anywhere not restricted.
Whoever originally started on the stock oversanded a bit so, I shimmed the rear of the triggers out enough for the set trigger to work. But if I shimmed it enough for proper operation the trigger bar/triggerguard will be proud of the stock. Didn’t take them back out to see if enough metal could be removed to fix the problem.
So, with some wedges and a bit of trigger work you’ll be good to go. And with a little re-browning it’ll be awesome looking to boot.
$350.00 shipped lower 48 anywhere not restricted.
Attachments
-
DB41B374-FFCD-46BC-9A28-860D32AF1453.jpeg74.9 KB · Views: 199
-
5954A87F-97F2-46C3-B162-D8FADB343CCA.jpeg75 KB · Views: 199
-
1C070FF7-AAB1-4FE5-B76F-3078E942D0C0.jpeg79.8 KB · Views: 187
-
1A6FB61D-9DB1-4980-A94B-8582B02E0399.jpeg75.9 KB · Views: 210
-
B89A85A7-5199-4D2C-BF01-B8B217A02015.jpeg77.7 KB · Views: 187