SOLD Thompson Center Hawken with .45 Green Mountain Barrel: $350 shipped.

[Splitear]

Here’s a nice little gun with a great barrel. The stock is a bit beat up (see photos and repair photo) but is glass bedded to fit the beautiful .45 caliber Green Mountain barrel that comes with it. At one point the gun had a peep, but the previous owner removed it. The barrel still has a front aperture sight on it. I will ship a dovetail front blade sight with the gun so the new owner can change it is desired. The gun will need a rear sight. No ram rod and will need thimbles to accommodate one.

Gun has been traded.

 

[weewill]

What twist rate is this ?

 

[Splitear]

What twist rate is this ?

I’m coming up between 1:66-1:68.

 

[weewill]

Thank You for checking the twist .

 

[Splitear]

TTT

 

[Splitear]

Reduced and to the top.

 

[sqqy14]

See that small screw just ahead of the tang? You can mount a Skinner peep sight there with a 6-48 thread.

 

[nkbj]

15/16" or 1" barrel?

Barrel length?

Is the tang one of those that TC drilled and tapped for the TC tang sights?

 

[Splitear]

15/16" or 1" barrel?

Barrel length?

Is the tang one of those that TC drilled and tapped for the TC tang sights?

Its 15/16, I’ll measure the barrel when I get home.

 

[Splitear]

15/16" or 1" barrel?

Barrel length?

Is the tang one of those that TC drilled and tapped for the TC tang sights?

Barrel is 28 3/4”. I’m not sure what all the tang will accommodate, but a photo of it is attached.

 

[Splitear]

Also of note is that there are 2 set screws for locking the barrel to the tang. Someone probably built this gun as an offhand or light bench gun.

 

[Splitear]

TTT

 

[Splitear]

Price Reduced.

 

[Splitear]

I'm open to reasonable offers. The worst I can do is say "No!" and write slanderous things about you in your local paper

 

[Dismount]

Here’s a nice little gun with a great barrel. The stock is a bit beat up (see photos and repair photo) but is glass bedded to fit the beautiful .45 caliber Green Mountain barrel that comes with it. At one point the gun had a peep, but the previous owner removed it. The barrel still has a front aperture sight on it. I will ship a dovetail front blade sight with the gun so the new owner can change it is desired. The gun will need a rear sight. No ram rod and will need thimbles to accommodate one.

Reduced to $350 shipped to conus. The barrel alone is practically worth that.

will a TC under rib fit the GM barrel?? i wonder?

 

[Splitear]

will a TC under rib fit the GM barrel?? i wonder?

I’m really not sure, sorry.