• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD REDUCED Customized. 54 Lyman Great Plains Rifle

L & R
muzzle loading side side shotguns
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
BigSkyRambler

BigSkyRambler

40 Cal.
MLF Supporter
Joined
Aug 25, 2007
Messages
3,497
Reaction score
4,398
Sold pending funds. OK. The customization is minimal. Previous owner stripped all finish off wood and barrel. The 1:66 twist barrel was given an aged browning finish. The stock was given a darker finish and no factory shine. The best part is the addition of a pineapple patchbox! The negatives. Someone overtightened the lock screw or dropped rifle and a crack formed through the lock screw up to barrel channel. The crack was too tight to separate and squirt in glue, so I drilled three small holes from inside and forced some epoxy into crack. Then, I put two steel pins through top in front of screw and one from the bottom behind the screw. Crack isn't going to fail. I tested with three 80 gr FFG loads behind Buffalo Bullets. See photo of 25 yard off hand group. $375 + Shipping.

20231212_172119.jpg
20231213_055631.jpg
20231212_172226.jpg
20231213_055734.jpg
20231213_055915.jpg
20231213_060001.jpg
20231212_172150.jpg
20231214_164619.jpg
20231214_164630.jpg
20231214_121810.jpg
 
Last edited:
BigSkyRambler said:
REDUCED OK. The customization is minimal. Previous owner stripped all finish off wood and barrel. The barrel was given an aged browning finish. The stock was given a darker finish and no factory shine. The best part is the addition of a pineapple patchbox! The negatives. Someone overtightened the lock screw or dropped rifle and a crack formed through the lock screw up to barrel channel. The crack was too tight to separate and squirt in glue, so I drilled three small holes from inside and forced some epoxy into crack. Then, I put two steel pins through top in front of screw and one from the bottom behind the screw. Crack isn't going to fail. I tested with three 80 gr FFG loads behind Buffalo Bullets. See photo of off hand group. $450 + Shipping.

View attachment 276572View attachment 276573View attachment 276574View attachment 276575View attachment 276576View attachment 276577View attachment 276578View attachment 276579View attachment 276580View attachment 276581
Click to expand...
. Does this GPR have the round ball twist?
 
BigSkyRambler said:
REDUCED OK. The customization is minimal. Previous owner stripped all finish off wood and barrel. The barrel was given an aged browning finish. The stock was given a darker finish and no factory shine. The best part is the addition of a pineapple patchbox! The negatives. Someone overtightened the lock screw or dropped rifle and a crack formed through the lock screw up to barrel channel. The crack was too tight to separate and squirt in glue, so I drilled three small holes from inside and forced some epoxy into crack. Then, I put two steel pins through top in front of screw and one from the bottom behind the screw. Crack isn't going to fail. I tested with three 80 gr FFG loads behind Buffalo Bullets. See photo of 25 yard off hand group. $450 + Shipping.

View attachment 276572View attachment 276573View attachment 276574View attachment 276575View attachment 276576View attachment 276577
Click to expand...

BigSkyRambler said:
REDUCED OK. The customization is minimal. Previous owner stripped all finish off wood and barrel. The 1:66 twist barrel was given an aged browning finish. The stock was given a darker finish and no factory shine. The best part is the addition of a pineapple patchbox! The negatives. Someone overtightened the lock screw or dropped rifle and a crack formed through the lock screw up to barrel channel. The crack was too tight to separate and squirt in glue, so I drilled three small holes from inside and forced some epoxy into crack. Then, I put two steel pins through top in front of screw and one from the bottom behind the screw. Crack isn't going to fail. I tested with three 80 gr FFG loads behind Buffalo Bullets. See photo of 25 yard off hand group. $425 + Shipping.

View attachment 276572View attachment 276573View attachment 276574View attachment 276575View attachment 276576View attachment 276577View attachment 276578View attachment 276579View attachment 276580View attachment 276581
Click to expand...
 
Status
Not open for further replies.

Similar threads

J
  • Locked
SOLD Left Hand 58 cal. Flintlock Mountain Rifle $700
Replies
10
Views
820
Jag
J
BigSkyRambler
  • Locked
SOLD Reduced Custom .50 Fullstock Flintlock Hawken Rifle
Replies
13
Views
2K
BigSkyRambler
BigSkyRambler
BigSkyRambler
  • Locked
SOLD Custom .36 Underhammer
Replies
10
Views
852
BigSkyRambler
BigSkyRambler
BigSkyRambler
  • Locked
WITHDRAWN Reduced .50 Southern Mountain Rifle
2
Replies
23
Views
5K
BigSkyRambler
BigSkyRambler
Mule333
  • Locked
WITHDRAWN Custom 50cal Rifle for sale
Replies
14
Views
1K
Mule333
Mule333

Latest posts

Back
Top