I have a CVA lock that suddenly has a 54 lb trigger pull. It cocks fine. The set trigger works. The hammer will go down smoothly with trigger pulled but when cocked it is a 54 lb (feels like it) pull. Is this a fly issue maybe??
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Percussion lock fly issue?
- Thread starter azmntman
- Start date
Help Support Muzzleloading Forum:
52Bore
40 Cal.
- Joined
- Dec 14, 2016
- Messages
- 633
- Reaction score
- 845
The fly may be broke? You might have to remove the lock and check.
The fly is just that, a fly to allow the sear to ‘fly’ (jump) over the safety notch. Nothing to do with trigger pull.
Top lock in ‘full cock’
Bottom in 1/2 cock (safe notch)
The fly is just that, a fly to allow the sear to ‘fly’ (jump) over the safety notch. Nothing to do with trigger pull.
Top lock in ‘full cock’
Bottom in 1/2 cock (safe notch)
