skratch
32 Cal
Got most of the parts finished except the elevation mech. This is just a mock up, waiting on the mold to arrive before finish.Couple more golf ball mortars I've made. All have a slap hammer using 209 shotgun
shell primers or can use fuse. The two holes in rear of base are for balls when used for display.
I should add these have a solid steel breach, bored for powder chamber and joined by machining
to the tube. The breach plus the tube have a combined wall thickness of at least 3/8 ". The powder
chamber is for 50 gr. of 4F. Much stronger than a .69 caliber musket. Just to assure they are not
potential pipe bombs.
shell primers or can use fuse. The two holes in rear of base are for balls when used for display.
I should add these have a solid steel breach, bored for powder chamber and joined by machining
to the tube. The breach plus the tube have a combined wall thickness of at least 3/8 ". The powder
chamber is for 50 gr. of 4F. Much stronger than a .69 caliber musket. Just to assure they are not
potential pipe bombs.
Last edited: