-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Green Mountain TC Renegade barrel swap
- Thread starter kenf
- Start date
Help Support Muzzleloading Forum:
- Joined
- Dec 15, 2016
- Messages
- 1,136
- Reaction score
- 2,477
Several potential fixes for this situation. I've notched the stock just enough for the barrel to set in place, one could remove enough matterial from the stock as a whole (rather than just notch it), or remove the underrib and grind it down some so it will fit.
- Joined
- Sep 20, 2010
- Messages
- 1,184
- Reaction score
- 1,128
In your case I would grind or file that 1/8” off the rib. Someday in the future you might want to put a factory renegade barrel on that stock. That would allow you to do that without modifications.
General rule is to modify the least expensive component to fit. In this case the rib.
When I did an L&R lock swap on a Renegade, I had to move the barrel back to have the touch hole line up in the center of the pan. I cut off the under rib and removed the ramrod keeper spring to accomplish the barrel move. The spring is totally unnecessary anyway. The TC ramrod was junk (snaky and lots of runout) so I made a new one out of a great ramrod blank a friend had given me. I sanded my new ramrod to correctly fit the pipes, it will never fall out.
longcruise
70 Cal.
Like @Eric Krewson and others have suggested, shorten the underrib.
I encountered this same problem recently and maybe I'm a bit crude in my solutions, but I removed the screw and rod retainer, slid a piece of plastic between the barrel and rib to lift the rib away from the barrel and filed the extra away. The plastic also protected the barrel from my poor filing skills.
Big project, took about 15 minutes!
I encountered this same problem recently and maybe I'm a bit crude in my solutions, but I removed the screw and rod retainer, slid a piece of plastic between the barrel and rib to lift the rib away from the barrel and filed the extra away. The plastic also protected the barrel from my poor filing skills.
Big project, took about 15 minutes!
westrayer
36 Cl.
Look for a machine shop near you and have them remove a bit off of the rib where it makes contact with the stock. You can do it yourself with files and a Dremel tool but it won't look as nice.
I took off about 1/4" of the under rib, it was very easy to reshape the nub with small files and different grit of sandpaper to be just like the original, a little cold blue on the end and no one will ever know it has been cut off. I removed the under rib from the barrel to do this job, 3 or 4 little screws and it was off.
Similar threads
- Locked
