• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD Elk antler pan primer

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Two Feathers

62 Cal.
MLF Sponsor
Joined
Apr 14, 2008
Messages
2,848
Reaction score
2,847
Location
Berwick, Pa. Columbia county
Howdy folks, Two Feathers here:

I have an item that’s different, for me. I’ve never made one of these, so I figured why not? It’s an Elk antler pan primer. The price is $45.00 USD$’s shipped to your door in a padded envelope to anywhere in the actual 50 United States. I cannot ship this item to Canada, due to wildlife conservation laws.

90% of the inside is hollow. Filling will require some kind of a funnel. You fill it through the removable valve. Just unscrew and remove the push valve, the threaded insert stays permanently in the antler, it WILL not come out! Be careful not to lose the little spring, then fill through the insert, screw the valve and spring back in and you’re ready to prime your pan. I have no way of knowing for certain (I have no 4 FFFFg powder here), but my best guess is, it will hold enough powder for about 30-40 shots? Each “push” of the valve into the flash pan will dispense 3 grains of FFFFg powder. DO NOT attempt to use powder larger than FFFFg! That will jam in the valve. It was NOT designed to dispense powder larger than FFFFg.

The base is Curly Maple. It has been treated with Aqua Fortis and Linseed oil to bring out the grain and the beauty of the wood. I painstakingly tacked in the wooden plug with 14 very tiny solid Brass nails. The short tine has been drilled through for a carry thong. The antler has been “Cleaned” but left natural for a rustic look. I did polish it just a bit.

The best measurements I can give you are 5” long (end of valve to bottom of wood, by 3” wide at the widest point across to “Y.” These are close, just in case you needed to know for fitting inside your bag, if you decide to carry it there?

This will fit right in at your next hunt; Rendezvous, or shoot?

I cannot ship/sell this item to Canada! All prices are in USD$ to the 50 United states. I prefer PayPal; but I also accept postal and bank money orders. MO’s will add 1 week for travel time. I ship same day as funds are received, the exceptions are Federal holidays, Sundays, PO hours, and severe weather.



If interested PM me here. As always, thanks for looking.

God bless:

Two Feathers
 

Attachments

  • Pan Primer 9-04-2021 001.JPG
    Pan Primer 9-04-2021 001.JPG
    190.2 KB · Views: 29
  • Pan Primer 9-04-2021 002.JPG
    Pan Primer 9-04-2021 002.JPG
    193.7 KB · Views: 25
  • Pan Primer 9-04-2021 003.JPG
    Pan Primer 9-04-2021 003.JPG
    75.4 KB · Views: 23
  • Pan Primer 9-04-2021 004.JPG
    Pan Primer 9-04-2021 004.JPG
    149.9 KB · Views: 23
  • Pan Primer 9-04-2021 005.JPG
    Pan Primer 9-04-2021 005.JPG
    166.3 KB · Views: 20
  • Pan Primer 9-04-2021 006.JPG
    Pan Primer 9-04-2021 006.JPG
    169.2 KB · Views: 22
  • Pan Primer 9-04-2021 007.JPG
    Pan Primer 9-04-2021 007.JPG
    61.1 KB · Views: 19

Latest posts

Back
Top