kenneth strickland
36 Cal.
- Joined
- Nov 10, 2005
- Messages
- 97
- Reaction score
- 1
I am trying to put my 1858 Remington CVA back together correctly. The cylinder hand has the spring, unbroken, attached. When I screw it back on the hammer and slide all into place with hammer screw replaced, the cylinder hand spring doesn't press against anything in the slot to press the hand toward the cylinder slots. It was spring loaded before disassembly. I've looked at schematics and all parts are accounted for and undamaged. I would appreciate any ideas. thanks Ken