• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

.82 dragoon

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
OH YA , NOT EVEN CLOSE ,YOU COULD LOAD THE BARREL HALF WAY WITH POWDER AND THE REST WITH LEAD AND YOU WOULD BREAK THE STOCK AND YOUR WRIST
 
That was always my guess but have never been able to find written documentation...just gotta go with the obvious! :thumbsup:
 
THE BREECH PLUG HAS TO HOLD OUT TOO AND MINE IS 4140 AND EXTRA DEEP ,YOU CAN SEE THE FLASH HOLE RELIEF CUTOUT ON THE BREECHPLUG ON BORE PIC
 
pistol_zpsdeed9529.jpg


she speaks
 
fired six rounds without hitch bullet on top of bullet, i think i got the frizzen oily and couldnt get ignition doa!
 
I'm new around here and a little late to this party, that is a thing of beauty! The skill and talent I keep seeing displayed in these forums is humbling. Nice work!
 
thanks guys
its all fun , but scratch building took far to much time ( too many ni=ce kits out there )
 
HOLY COW! Least it would be if you shot it with that artillery piece! Great job! :hatsoff:
 
guys
i put a lott lock on this thing and know there is a direct replacement for these lott locks what is it abnd where do you find them?
 
I have access to some de-milled 30 mm warthog barrel. Barrel is till good just had the chamber cut off. Want to make another pistol? :rotf: How much would that ball weigh? The bore measures something like 1 3/16 inch across the grooves. Mike D.
 
Back
Top