• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD Engraved Powder Horn (#58)

Shop deals on ebay
shop deals on amazon
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
PathfinderNC

PathfinderNC

Artist
MLF Supporter
Joined
Nov 11, 2011
Messages
4,498
Reaction score
11,346
Location
Surry County, North Carolina
Powder Horn 58 is just finished; it came out pretty nicely I think. This is a right-side carry (it would work on left as well). The length is 12" along the bottom curve and the base is 2- 3/4" high by 2" wide. The base plug and stopper are both Mahogany.
The engraving work is nicely detailed, fine-lined and deep. I chose to leave the body of the horn bright white to present a nice sharp contrasting between black and white. The horn is finished with several applications of Paste Wax.
Asking $385 for this horn plus $15 shipping (or pick-up at the CLR Show :) )
Thanks for looking!
Bob
 

Attachments

  • 58 as.jpg
    58 as.jpg
    719.2 KB · Views: 6
  • 58 bs.jpg
    58 bs.jpg
    722.6 KB · Views: 0
  • 58 ds.jpg
    58 ds.jpg
    515.9 KB · Views: 0
  • 58 es.jpg
    58 es.jpg
    464.8 KB · Views: 0
  • 58 fs.jpg
    58 fs.jpg
    460.3 KB · Views: 0
  • 58 gs.jpg
    58 gs.jpg
    448.2 KB · Views: 0
  • 58 is.jpg
    58 is.jpg
    410 KB · Views: 0
  • 58 ks.jpg
    58 ks.jpg
    405.4 KB · Views: 0
  • 58 ls.jpg
    58 ls.jpg
    209.4 KB · Views: 0
  • 58 ms.jpg
    58 ms.jpg
    274.6 KB · Views: 0
Last edited:
PathfinderNC said:
Powder Horn 58 is just finished; it came out pretty nicely I think. This is a right-side carry (it would work on left as well). The length is 12" along the bottom curve and the base is 2- 3/4" high by 2" wide. The base plug and stopper are both Mahogany.
The engraving work is nicely detailed, fine-lined and deep. I chose to leave the body of the horn bright white to present a nice sharp contrasting between black and white. The horn is finished with several applications of Paste Wax.
Asking $410 for this horn plus $15 shipping (or pick-up at the CLR Show :) )
Thanks for looking!
Bob
Click to expand...
Ooops- one more pic!
 

Attachments

  • 58 sign.jpg
    58 sign.jpg
    147.4 KB · Views: 0
PathfinderNC said:
Powder Horn 58 is just finished; it came out pretty nicely I think. This is a right-side carry (it would work on left as well). The length is 12" along the bottom curve and the base is 2- 3/4" high by 2" wide. The base plug and stopper are both Mahogany.
The engraving work is nicely detailed, fine-lined and deep. I chose to leave the body of the horn bright white to present a nice sharp contrasting between black and white. The horn is finished with several applications of Paste Wax.
Asking $385 for this horn plus $15 shipping (or pick-up at the CLR Show :) )
Thanks for looking!
Bob
Click to expand...
Excellent. Very nice job.
 
PathfinderNC said:
Powder Horn 58 is just finished; it came out pretty nicely I think. This is a right-side carry (it would work on left as well). The length is 12" along the bottom curve and the base is 2- 3/4" high by 2" wide. The base plug and stopper are both Mahogany.
The engraving work is nicely detailed, fine-lined and deep. I chose to leave the body of the horn bright white to present a nice sharp contrasting between black and white. The horn is finished with several applications of Paste Wax.
Asking $385 for this horn plus $15 shipping (or pick-up at the CLR Show :) )
Thanks for looking!
Bob
Click to expand...
There ought to be a law against someone having so much talent! That is museum quality work!
 
PathfinderNC said:
Powder Horn 58 is just finished; it came out pretty nicely I think. This is a right-side carry (it would work on left as well). The length is 12" along the bottom curve and the base is 2- 3/4" high by 2" wide. The base plug and stopper are both Mahogany.
The engraving work is nicely detailed, fine-lined and deep. I chose to leave the body of the horn bright white to present a nice sharp contrasting between black and white. The horn is finished with several applications of Paste Wax.
Asking $385 for this horn plus $15 shipping (or pick-up at the CLR Show :) )
Thanks for looking!
Bob
Click to expand...
dang thats a pretty sight to behold. wow. you do beautiful work
 
Status
Not open for further replies.

Similar threads

PathfinderNC
  • Locked
SOLD Horn #55
Replies
17
Views
834
Giddy-up
G
PathfinderNC
  • Locked
SOLD Powder Horn #56
Replies
12
Views
645
Famman
Famman
Hawk54
  • Locked
SOLD 3 Powder Horns #5 For Sale $70 (SPF)
Replies
2
Views
331
Hawk54
Hawk54
Hawk54
  • Locked
SOLD Powder Horn #2 Engraved w/Strap/Powder Measure $60 (SOLD)
Replies
6
Views
665
Hawk54
Hawk54
PathfinderNC
  • Locked
CLOSED Powder Horn "Carpe Diem"
Replies
12
Views
763
PathfinderNC
PathfinderNC

Latest posts

Back
Top