• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Confederate Revolvers

the hawken shop
muzzle loading side side shotguns
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Jappo

Jappo

50 Cal.
MLF Supporter
Joined
Oct 24, 2022
Messages
1,033
Reaction score
821
Location
Texas
Was asked by a member to post my Confederate collection. These didn't come already in the form they are in. I had to find the parts and assembled them. All except the Spiller and Burr and the Dennix Lemat. The Pietta Lemat I had was out of time and it chain fired twice on me. I got rid of it and have not replaced it because of the cost.
So here is what I have right now.
 

Attachments

  • 20240403_083518.jpg
    20240403_083518.jpg
    3.5 MB · Views: 7
  • 20240402_113742.jpg
    20240402_113742.jpg
    2.9 MB · Views: 0
  • 20240402_113612.jpg
    20240402_113612.jpg
    4.6 MB · Views: 0
  • 20231227_165105.jpg
    20231227_165105.jpg
    2.8 MB · Views: 0
  • 20231227_165024.jpg
    20231227_165024.jpg
    4.5 MB · Views: 0
  • 20231227_164954.jpg
    20231227_164954.jpg
    4.5 MB · Views: 0
  • 20231227_164836.jpg
    20231227_164836.jpg
    4.6 MB · Views: 0
  • 20240403_084739.jpg
    20240403_084739.jpg
    3.7 MB · Views: 0
When I first started about 8 years ago. I thought they only made the 36. Most all Confederate revolvers were in 36. This is one I don't have. Only difference from a Colt 1851 is the Confederate engraving. I doubt I'll ever find a 12 notch cylinder.
 

Attachments

  • Screenshot_20240403-101921_Firefox.jpg
    Screenshot_20240403-101921_Firefox.jpg
    675.5 KB · Views: 0
Jappo said:
Yanks are pretty simple. Top to bottom. 1851 Navy, 1860 Army, 1861 Navy, 1862 Pocket and 1858 Remington Army and Navy. Im sure there's more but this is what I have.
Click to expand...
Thanks a lot for sharing! When I first heard of two historic walls of two parties, I knew I wanted to see them!
 
Jappo said:
Well I figured if I could display Confederate arms, a flag is not much different to me. I didn't do it to offend anyone. And I hope no one is offended. Its just history. And its Texas
Click to expand...
I recently gave a presentation to a small crowd on Confederate Currency and I used a flag as a backdrop. It not only made for a "colorful" display , it was an attention getter as well. Right, it's just history and darn sure Texas.
 
Last edited:
https://digitalprojects.rice.edu/wr...original/d9d5755fdfca4ed9bb73aa73e9e0232b.jpg
Yes it is Texas for sure. Was trying to find a picture of my GG grandfather from the war hoping to see a revolver he carried. He was an engineer from Switzerland and emigrated to Texas in the 1840’s. Went from Texas to California for the gold rush returned to Texas because of the war. Served as chief engineer for department of Texas for duration responsible for fortifications at Galveston and Sabine Pass and others. After the war ended went to Mexico working for Swiss engineering firm Jecker working on Veracruz to Mexico City rail line. In his memoirs wrote about he and a fellow engineer cleaning guns at night, one remaining loaded on guard while the other cleaned. You can look him up on the web. Getulius Kellersberger, Swiss engineer, civil war.
 
barnettshale said:
https://digitalprojects.rice.edu/wr...original/d9d5755fdfca4ed9bb73aa73e9e0232b.jpg
Yes it is Texas for sure. Was trying to find a picture of my GG grandfather from the war hoping to see a revolver he carried. He was an engineer from Switzerland and emigrated to Texas in the 1840’s. Went from Texas to California for the gold rush returned to Texas because of the war. Served as chief engineer for department of Texas for duration responsible for fortifications at Galveston and Sabine Pass and others. After the war ended went to Mexico working for Swiss engineering firm Jecker working on Veracruz to Mexico City rail line. In his memoirs wrote about he and a fellow engineer cleaning guns at night, one remaining loaded on guard while the other cleaned. You can look him up on the web. Getulius Kellersberger, Swiss engineer, civil war.
Click to expand...
I was under the impression the forts along the Texas Coast were designed by Col. Valery Sulakowski. Did they work together? And thanks for bringing this "bit of information" to our attention.
 
GG Kellersberger and the Col didn’t get along very well. He did report to him. The Col was the department head but my GG is the one boots on the ground responsible for construction. Also came up with the Quaker cannon ploy. He was part of the force that retook Galveston from the Federals during the war. Couldn’t do much about the blockade though except keep them guessing with the Quaker cannon.
 

Similar threads

ZUG
Pietta Spiller & Burr Revolver
2
Replies
30
Views
940
ZUG
ZUG
Jappo
  • Locked
SOLD Santa Barbara Engraved 1858 New Model Army
Replies
13
Views
871
Jappo
Jappo
hinamanra
LeMat Revolver
2 3
Replies
40
Views
2K
Relic shooter
Relic shooter
T
  • Locked
SOLD Pietta Lemat Revolver - brand new, never fired - Sold Pending Funds
Replies
7
Views
1K
tdp76
T
Secesh
Conicals in .36 revolvers
Replies
17
Views
916
Secesh
Secesh

Latest posts

Back
Top