-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
ZUG's latest activity
Help Support Muzzleloading Forum:
-
ZUG reacted to Bad Karma's post in the thread Inquiry about current replica percussion revolvers with
Love.
Me too. -
Nice attitude, I'm sure you'll get a lot of help, By the way I've never had any issues with TC screws. Not sure why the end of the screw...
-
Buy a $20 dial caliper and measure the cast balls. Buy a set of pin gauges from McMastet-Carr sized from .452 to .457 and find out what...
-
My question also. A previous owner might have messed with the cylinders. Is your lead soft? It should be. Regardless, the balls still...
-
ZUG replied to the thread I found 5 of Dad's C&B Revolvers....They are all very nice revolvers dad left you - lucky man!;). As others have said get yourself a GOOD set of gunsmithing screwdrivers, a...
-
ZUG replied to the thread Remington 1858/Pietta.They are good - You can get a gun that has a great action or you could end up with a rough one - it's a manure shoot. I have two Piettas...
-
If you don’t take the hammer off then why are you messing with the screw?
-
ZUG replied to the thread Pietta Spiller & Burr Revolver.No - the springs that I ordered are factory replacements - not reduced power springs. I can alter them as I wish to get the tension that...
-
ZUG replied to the thread Acra glas solvent/thinner.Caution must be used when thinning epoxies - too much thinning down and the epoxy will not cure and end up "gummy". Do some...
-
The real Sherman would destroy every bear food source for 100 miles, toreup all the bear trails, killed its offspring, and told that...
-
ZUG replied to the thread Pietta Spiller & Burr Revolver.Great picture Ernbar. My barrel and frame are flush with each other. Very little clearance (0.002" - 0.003") between barrel and inside...
-
ZUG replied to the thread Revolver loading stand.One is for seating the caps if necessary and the other is a spatula for applying the lube /grease over the ball after you ram it into...
-
ZUG replied to the thread Revolver loading stand.Here it is finished except for a coat of stain and sealer or paint which my buddy will be in charge of.;)
-
-
ZUG replied to the thread Revolver loading stand.The one on the right does have leather at all contact points of the Walker- barrel, recoil shield, and at the grip area. The hammer...
-
ZUG replied to the thread Revolver loading stand.Sorry for the double pictures of the same item - I don't know how to get rid of one of them.:dunno:
